List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Data Converter Systems on Chip

    SBC: SILICON TECHNOLOGIES, INC.            Topic: A18009

    Silicon Technologies will design and simulate in Verilog-AMS and Cadence Spectre an ADC, two DACs, a serial interface and other circuits to be built on a single chip in a ITAR complaint manufacturing process.The ARMY is interested in this development for use in a SWAP-C ASIC for next generation fuse proximity sensors and other programs.STI proposes to use an existing pipelined ADC that has been bu ...

    SBIR Phase I 2019 Department of DefenseArmy
  2. Nuetralize Enemy Drones

    SBC: IMSAR LLC            Topic: A18010

    In order to address the improvised threat to U.S. Forces created by enemy drones, IMSAR proposes to use its Commercial, Off-The-Shelf (COTS) NSP-3 Ku-band radar as the foundation for a system architecture capable of detecting, tracking, and neutralizing enemy drones. With low Size, Weight, and Power (SWaP) requirements, the NSP-3 can provide high capabilities to even small Unmanned Aircraft System ...

    SBIR Phase I 2019 Department of DefenseArmy
  3. High Power, Electronically Steerable Quantum Cascade Lasers

    SBC: NOUR, LLC            Topic: N182109

    The goal of this proposed Phase I effort is to design and demonstrate a monolithic architecture for two-dimensional, all-electronic beam steering of a high power, mid-infrared laser. A photonic integrated circuit architecture is described which contains a widely tunable, mid-infrared quantum cascade laser integrated with a phase-adjustable amplifier array and a high efficiency grating outcoupler. ...

    SBIR Phase I 2019 Department of DefenseNavy
  4. Fiber Optic Condition Based Management System

    SBC: Sequent Logic, LLC            Topic: N182125

    Sequent Logic is proposing a fiber-optic condition-based management platform that addresses the Navys need for an intelligent, adaptable, reconfigurable, scalable, expandable, reliable, compact, and affordable means of passively and actively monitoring temperature, strain, vibration, and acoustic emissions, and that is capable of characterizing material anomalies and fatigue to predict time-to-ins ...

    SBIR Phase I 2019 Department of DefenseNavy
  5. Effect of Surface Finish and Post-Processing on the Fatigue Life of Additively Manufacturing Parts

    SBC: QUESTEK INNOVATIONS LLC            Topic: N182126

    In this Phase I SBIR, QuesTek Innovations will work with a leader in the field of surface finish engineering to pursue a tandem approach for developing techniques for surface finishing, and developing a modeling framework for predicting fatigue life based on surface finish. Exemplar models provided by the US Navy will be investigated with target alloy system(s) to fully demonstrate the technology ...

    SBIR Phase I 2019 Department of DefenseNavy
  6. Conductive Composites for Electro-Magnetic Interference Composite Rigid Wall Shelter (EMI CRWS)

    SBC: Conductive Composites Company, L.L.C.            Topic: N172103

    Rigid Wall Shelters (RWS) are an integral building block for Marine Corp operations and support a multitude of operational needs from maintenance and repair operations to command posts and medical operations. There are several key operational deficiencies with metal RWS, the weight of legacy systems and lack of insulation result in a high cost to transport and difficulty heating and cooling interi ...

    SBIR Phase I 2018 Department of DefenseNavy
  7. Innovative Materials for Highly Loaded Wear Application in Arresting Gear Tailhook Components

    SBC: QUESTEK INNOVATIONS LLC            Topic: N093175

    Ferrium M54 is an ultrahigh-strength, high, toughness steel with high resistance to grinding burn damage, and stress corrosion cracking, which provides many technical and commercial benefits for use in the F-18 E/F/G hook point application over the incumbent 4330V steel. The technical advantages for risk mitigation, while extending the component life at approximately the same cost makes for a good ...

    SBIR Phase II 2018 Department of DefenseNavy
  8. Applying Advanced Human Engineering Methods to Mission Planning for Multi-Manned or Unmanned Air Vehicles

    SBC: Monterey Technologies, Inc.            Topic: N141019

    The proposed Phase II.5 ViPER USMC large mission planning mission planning expansion effort seeks to add capabilities to ViPER-CVW that will provide an initial large force air planning capability to USMC aviation planners. Development will focus on providing route and airspace deconfliction tools which link airspace, flight routing, and planned aircraft movements, as well as automated checks to en ...

    SBIR Phase II 2018 Department of DefenseNavy
  9. Affordable Manufacturing of Refractory Metal Components

    SBC: SCIAKY, INC.            Topic: N142125

    The primary objective of this SBIR initiative is to develop, demonstrate, and validate new manufacturing technologies. The focus is complex parts made from refractory metals manufactured at reduced costs and increased fabrication rates. The target components are for use in post-boost control system (PBCS) hot-gas valves and manifolds. Emphasis on and addressing scale up for fabrication of full-sca ...

    SBIR Phase II 2018 Department of DefenseNavy
  10. WesTest Hardware Modeler for LASAR Digital Device Simulationcompatible with the VDATS Di-Series digital subsystem

    SBC: WESTEST ENGINEERING CORPORATION            Topic: AF172005

    Many custom and hybrid integrated circuits (ICs) and custom electronic components cannot bemodeled in simulation software because of their complexity and/or lack of technical data.TPS developers need to use a hardware modeler for these types of integrated circuits.The proposed WesTest Hardware Modeler will be compatible with LASAR and the VDATS Di-Series digital subsystem.It utilizes the Teradyne ...

    SBIR Phase I 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government