You are here

Home » Reports

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 21 results
 
  • Record 1 TO 21

  1. DEVELOPMENT OF A TOTAL PEROXY DETECTOR FOR FLAME AND COMBUSTION MEASUREMENTS

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    A RESEARCH AND DEVELOPMENT PROGRAM IS PROPOSED WHICH WILL DETERMINE THE TECHNICAL FEASIBILITY OF AN INSTRUMENT DESIGNED TO PROVIDE THE CAPABILITY OF MEASURING THE CONCENTRATION OF OXY AND PEROXY FREE RADICALS IN COMBUSTION STUDIES. THE DETECTOR FOR THE INSTRUMENT IS BASED ON AN AMBIENT FREE RADICAL DETECTOR WHICH USES AN AMPLIFICATION CHAIN REACTION BETWEEN THE FREE RADICALS AND CO AND NO WHICHRES ...

    SBIR Phase II 1987 Department of Energy

  2. LASER-BASED ULTRASONIC EXCITATION AND SPECKLE INTERFEROMETRIC DETECTION SYSTEMS FOR NONDESTRUCTIVE EVALUATION OF HIGH-TEMPERATURE CERAMICS

    SBC: American Research Corporation of Virginia            Topic: N/A

    THE USE OF ADVANCED MATERIALS SUCH AS CERAMICS, CERAMIC COMPOSITES, AND HIGH TEMPERATURE COATINGS HAS LED TO IMPROVED PERFORMANCE OF CRITICAL HEAT ENGINE AND ENERGY-RELATED COMPONENTS AND SYSTEMS. HOWEVER, THE REQUIREMENTS FOR NONDESTRUCTIVE EVALUATION (NDE) OF CERAMIC MATERIALS RESULTING FROM COMPLEX GEOMETRY, INHOMOGENEITY, REDUCED FLAW SIZE, AND ADVERSE PROCESSING ENVIRONMENTS HAVE PRODUCED LON ...

    SBIR Phase I 1987 Department of Energy

  3. A HIGH-EFFICIENCY TECHNIQUE FOR STEAMFLOODING DEEP, HEAVY OIL RESERVOIRS

    SBC: Carbotek Inc            Topic: N/A

    A STEAMFLOODING/STEAM GENERATION SYSTEM IS PROPOSED FOR DEEP, HEAVY OIL RESERVOIRS. THIS CONCEPT MINIMIZES THE DOWNHOLE HEAT LOSSES, IMPROVES RELIABILITY AND REDUCES THE COST OF STEAM GENERATION. ITS FEATURES WILL MAKE STEAMING OF VERY DEEP WELLS (BELOW 7500 FEET) TECHNICALLY AND ECONOMICALLY FEASIBLE, AND WILL IMPROVE THE ECONOMICS OF SHALLOWER WELL STEAMFLOODING. THIS NOVEL CONCEPT SUPPLIES HEAT ...

    SBIR Phase II 1987 Department of Energy

  4. A NOVEL, INSULATED, DOUBLE-WALLED TUBE DESIGN FOR THERMALLY-ENHANCED OIL RECOVERY

    SBC: Carbotek Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of Energy

  5. A PARALLEL ASSOCIATIVE COMPUTER FOR HIGH-SPEED EXECUTION OF LOGIC PROGRAMS AND EXPERT SYSTEMS

    SBC: Coherent Research Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of Energy

  6. COST-EFFECTIVE TECHNIQUES FOR DEVELOPMENT OF RADIATION-RESISTANT ORGANIC INSULATORS FOR SUPERCONDUCTING MAGNETS

    SBC: COMPOSITE TECHNOLOGY DEVELOPMENT, INC.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of Energy

  7. A MULTIBAR RIM DRIVE FOR HELIOSTAT SOLAR CONCENTRATORS

    SBC: Dan-ka Products Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of Energy

  8. A FEASIBILITY STUDY FOR A SEISMIC EARLY WARNING SYSTEM FOR NUCLEAR POWER PLANT SHUTDOWN

    SBC: ENSCO Inc            Topic: N/A

    A FEASIBILITY STUDY WILL BE CONDUCTED OF A SEISMIC SCRAM-PROCESSING SYSTEM IN WHICH P WAVES FROM LARGE EARTHQUAKES ARE DETECTED AND ANALYZED IN TIME TO INITIATE A NUCLEAR POWER PLANT CORE SHUTDOWN BEFORE THE ARRIVAL OF LARGE, DAMAGING SHEAR WAVE PHASES. A PROTOTYPE SEISMIC SCRAM-MONITORING SYSTEM WILL BE DESIGNED AND IMPLEMENTED ON A SUN 3/160 ENGINEERING WORKSTATION. IN THE PROPOSED SYSTEM, SEISM ...

    SBIR Phase I 1987 Department of Energy

  9. A HYPERVELOCITY PELLET INJECTOR

    SBC: InterScience, Inc.            Topic: N/A

    TO ACHIEVE PRECISE SHAPING OF DENSITY PROFILES IN FUSION REACTORS WITH PELLET FUELING, INJECTION VELOCITIES OF UP TO 10 KM/SEC MAY BE REQUIRED FOR PELLETS OF A FEW MILLIGRAMS IN MASS. PRESENT PELLET INJECTORS BASED ON THE PNEUMATIC GUN OR CENTRIFUGE PRINCIPLES ARE CAPABLE OF ATTAINING VELOCITIES OF ABOUT 2 KM/SEC, AND THE BASIC CONCEPTS DO NOT APPEAR TO BE EASILY SCALABLE TO HIGHER PERFORMANCES. A ...

    SBIR Phase I 1987 Department of Energy

  10. COST EFFECTIVE, HIGH PERFORMANCE TRANSIENT RECORDER SYSTEMS,UTILIZING THE LATEST ADC'S, S/H'S, MEMORIES AND PLA'S

    SBC: Joerger Enterprises, Inc.            Topic: N/A

    THERE ARE AT PRESENT A LARGE NUMBER OF CAMAC MODULES DESIGNED FOR TRANSIENT RECORDER WORK. WHILE THESE PROVIDE ADMIRABLE TECHNICAL QUALITIES THEY ALSO PRESENT SOME FORMIDABLE PROBLEMS. THE BIGGEST OF THESE ARE THEIR HIGH PRICES AND THE AMOUNT OF CRATE SPACE THEY REQUIRE. THE PRICE PROBLEM COMES INTO PLAY AT SPEEDS ABOVE 1MHZ SINCE THESE MODULES USE FLASH CONVERTERS THAT ARE VERY EXPENSIVE. THE OTH ...

    SBIR Phase II 1987 Department of Energy
US Flag An Official Website of the United States Government