You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Passsive UV Imaging Polarimeter For Atmospheric Studies

    SBC: Optical Coating Solutions, Inc.            Topic: S1

    A new UV imaging polarimeter design was demonstrated by Optical Coating Solutions, Inc. (OCS) as a proof-of-concept breadboard in a 2016 Phase I effort (NASA Contract NNX16CA44P). A version of that generic design is proposed for atmospheric studies in a follow-on effort.nbsp;The new polarimeter design can operate to wavelengths as short as 260nm and does not employ electronic or mechanical modulat ...

    SBIR Phase I 2019 National Aeronautics and Space Administration
  2. ANGRIBRD: ANGR for Intelligent Binary Runtime Defense

    SBC: Computer Measurement Laboratory, LLC            Topic: AF182104

    This project will investigate the use of offensive binary analysis techniques to extract data from program binaries for use by a runtime diagnostic engine capable of malware detection and response. The open-source Angr framework provides the basis for the tools used to collect the analysis data needed to support a diagnostic engine. A diagnostic engine capable of using these collected results will ...

    SBIR Phase I 2019 Department of DefenseAir Force
  3. Secure Assured File Transfer Drive

    SBC: IDAHO SCIENTIFIC LLC            Topic: AF191049

    1. To address the short comings in existing forensics bridge design, reduce the workload of system security staff, and increase the security of assured file transfers, Idaho Scientific proposes a nine month, $150k effort to design and prototype a Secure Assured File Transfer drive. (SAFE-T Drive) is a high assurance purpose built AFT drive with an integrated forensics bridge. SAFE-T Drive will fil ...

    SBIR Phase I 2019 Department of DefenseAir Force
  4. Portable Wall-Penetrating Radar Sensor for Air Force Security Forces

    SBC: LUMINEYE INC.            Topic: AF192001

    Lumineye provides wall-penetrating radar to help first-responders and soldiers identify people and threats through walls. We propose investigating the utility of our existing through-wall sensor for the Air Force Security Forces. Our device focuses on improving the situational awareness of the AFSF in all law enforcement, emergency response situations, and combat missions. The system will improve ...

    SBIR Phase I 2019 Department of DefenseAir Force
  5. Secure Processor Features for the Enforcement of Separation Kernels

    SBC: IDAHO SCIENTIFIC LLC            Topic: A18133

    Idaho Scientific presents a Risc-V based secure processor architecture that provides unique security properties complimentary to the seL4 microkernel. The work conducted under this Phase I SBIR effort will further the discipline of computer security by mitigating memory corruption vulnerabilities, enforcing strong processes separation, covering seL4's formal verification assumptions, and provide a ...

    SBIR Phase I 2019 Department of DefenseArmy
  6. ForeWarm: FHE Microclimate Heating System for Strength and Dexterity

    SBC: American Semiconductor, Inc.            Topic: A19058

    American Semiconductor’s programmable forearm worn hand and finger heating system (ForeWarm™) implements advanced flexible electronic and printed heater materials in an innovative stretchable wearable system. The ForeWarm system increases hand and finger temperatures to improve dexterity and finger strength in cold air exposure. A warfighter wearing the ForeWarm system is able to perform compl ...

    SBIR Phase I 2019 Department of DefenseArmy
  7. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT SCIENCE CORPORATION            Topic: A17003

    The overall goal of this project is to develop an in-process defect monitoring and correction technique for additive manufacturing (AM) of aluminum alloy to improve repeatability for geometric dimensions, material properties, and quality. In Phase I, Sentient collaborated with Johns Hopkins University Applied Physics Lab, and successfully completed all proposed tasks demonstrating two key capabili ...

    SBIR Phase II 2019 Department of DefenseArmy
  8. Reliability Centered Additive Manufacturing Design Framework

    SBC: SENTIENT SCIENCE CORPORATION            Topic: N152109

    To address U.S. Navy needs, Sentient proposes to establish a Design Framework for reliability assurance of additive manufactured (AM) parts using their DigitalCloneTM Component (DCC) software. The framework will be tailored to metal components built through AM processes with complex geometries. Sensors are embedded during AM component build to allow for exploitation of sensor data, physics-based m ...

    SBIR Phase I 2016 Department of DefenseNavy
  9. Secure Protocol Unalterable Data (SPUD)

    SBC: IDAHO SCIENTIFIC LLC            Topic: MDA15009

    Idaho Scientific proposes to design and develop, SPUD, an irrefutable tamper logging protocol.During the course of this Phase I effort, Idaho Scientific will implement the core of the logging protocol and develop a set of unit tests designed to evaluate properties of that protocol that uphold its irrefutable claims. During a Phase II effort, Idaho Scientific would propose to encapsulate this proto ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  10. Robust 2700 F MC/C Fiber Reinforced Matrices for Turbine Engines

    SBC: ADVANCED CERAMIC FIBERS, L.L.C.            Topic: N141074

    Advanced Ceramic Fibers, LLC (ACF) completed the Navy SBIR Phase I Base Program and clearly demonstrated the feasibility of our approach to create a truly robust composite for turbine engines that exceeds the known boundaries for ceramic composites and the Navy performance objectives for this Topic. Our engineered materials approach involved in-depth background experience in ceramic matrix composi ...

    SBIR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government