Award Data

Due to increasing concerns over long-term effects of PFOS and PFAS on human body, health based values were set by regulatory authoritative bodies for drinking water standard. Currenty lab-based PFOA and PFOS water tests cost $200-$300 per sample with a turnaround time of 2-3 weeks. In this program, 2W iTech LLC proposes to develop a low-cost fieldable sensing technology for detecting trace amounts ...

The widespread use of per- and polyfluorinated alkyl species (PFAS) chemicals for commercial products and industrial applications has resulted in bioaccumulation of these chemicals in the environment and a public health hazard. Development of novel approaches for in situ degradation of PFAS in industrial and landfill wastewaters would greatly facilitate efforts to prevent discharge of these hazard ...

This proposal addresses the need for a pre-treatment technology to remove per- and poly- fluoroalkyl substances (PFAS) from industrial wastewaters. Phase I involves the design, build and testing of a novel technology to remove PFAS from water, termed the Aqueous Electrostatic Concentrator (AEC). This technology will be tested as an electrical bench-scale device that concentrates PFAS through selec ...

Wild fires produce significant air pollution, posing health risks to first responders, residents in nearby areas, and downwind communities. Wildfires are increasing in size and intensity, and the fire season is growing longer. Technologies for measuring air pollutants, including particulates, carbon monoxide, nitrogen dioxide, and carbon dioxide, over the wide range of levels expected in areas dow ...

As forest fires are increasing in prevalence and intensity there is a need for miniaturized, lower cost, and easily portable air sensors that provide information to first responders, public health managers and communities so informed, timely decisions can be made. PM2.5 is an accepted standard for particulate matter (PM) measurements, but PM2.5 mass measurements cannot identify sources without ana ...

The Environmental Protection Agency (EPA) is seeking a ground-level air-quality monitoring device to measure wildland fire pollutants including carbon monoxide, carbon dioxide, nitrogen dioxide, and particulates, in a small, easy-to-use unit capable of data storage and data viewing. As more frequent wildfires are expected to occur near populated areas, air-quality monitoring will be more persisten ...

Due to release of industrial and landfill effluent into the environment, per- and polyfluorinated alkyl species (PFAS) have been accumulating in soil, sediment and groundwater, with subsequent absorption by living organisms. PFAS have the potential to cause multiple adverse health effects, including low birth weight, accelerated puberty, and cancer. Novel approaches for in situ degradation of PFAS ...

Stormwater management is a growing challenge across the country. Water quality standards are becoming increasingly strict as new regulations are developed at the state level. Meanwhile, changing land use and greater urbanization make meeting these standards even more difficult. Currently, stormwater samples are collected in the field and analyzed in the lab, a process which is time-consuming, cost ...

Advances in materials and automation are rapidly reshaping the American manufacturing economy, and must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $700M in 202 ...

In the Phase II project, METSS will continue the development of a safe, robust, rapid, and effective chlorine dioxide (ClO2) gas dispersion system to be used for on-site room decontamination in hospital and non-hospital settings. The heart of the decontamination system is a proprietary ClO2 generating micro-reactor technology that is used to quickly and safely generate ClO2 on-site. This technolog ...