You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Performance Cooled Seeker Window

    SBC: MAINSTREAM ENGINEERING CORP            Topic: MDA17005

    Infrared (IR) windows operating in the environment experienced by endo-atmospheric interceptors are limited in performance by the high heat fluxes, temperatures, and pressures characteristic of these environments. Window temperature can exceed 900 C from exposure to the high heat fluxes and temperatures associated with hypersonic flight. Existing materials are limited by poor mechanical and optica ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  2. On-board Smart Vision System to Support Vehicle-to-Infrastructure (V2I) Communication

    SBC: Connected Wise LLC            Topic: 180FH1

    Connected automated vehicle (CAV) technology has significant implications in terms of transportation system safety and efficiency. However, building and maintaining a wireless communication infrastructure (e.g. roadside units (RSUs), power, fiber optic lines etc.) across the U.S. is a challenging task. In urban areas, where vehicle population and vehicle-miles-traveled (VMT) are high, building suc ...

    SBIR Phase II 2019 Department of Transportation
  3. Electron Beam Additive Manufacturing of Upper Stage Propellant Tanks

    SBC: MAINSTREAM ENGINEERING CORP            Topic: MDA18021

    This program is significant in that it represents a leap forward in electron beam (Ebeam) processes as well as liquid propellant tank designs. Mainstream will demonstrate the technical feasibility of Ebeam additive manufacturing (AM) for upper-stage liquid propellant tanks with Mainstream’s EBEAM facility by fabricating test coupons and subscale prototype components from novel materials. We will ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  4. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  5. Performance Optimized Hierarchical Microstructure Propellant for Future Small Interceptor Rocket Motors

    SBC: HELICON CHEMICAL COMPANY LLC            Topic: MDA18004

    Future interceptors would benefit from advanced propulsion capabilities, with higher performance in smaller, volume-constrained systems. Innovative propellant chemistry is needed to enable substantially greater performance in smaller packages. One factor limiting the maximum performance achievable in modern solid propellants is the slow ignition and combustion of the propellant’s metal fuel part ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  6. Advanced Development of Inception Technologies for Requirements Management (ADIT-RM)

    SBC: MODUS OPERANDI, INC.            Topic: MDA11030

    Preliminary definition and analysis of Ballistic Missile Defense System (BMDS) requirements in an isolated, manual, and loosely controlled change environment shows significant overlap in effort, resulting in a major increase to cost, schedule, mission classification, subsystem propagation, and trace of system impacts. To assist MDA with movement of BMDS mission objectives to mission requirements, ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  7. Guided Augmented Independence Travel Aid (GAIT-Aid)

    SBC: Design Interactive, Inc.            Topic: 180FT1

    Lack of transportation access affects approximately 30% of people with functional limitations. In fact, people with functional limitations experience transportation access barriers four times more than those without limitations. With the emerging market of low cost augmented and virtual reality technology, perceptual user interfaces (PUI) that interact more naturalistically with end-users are prov ...

    SBIR Phase II 2019 Department of Transportation
  8. Scale-Up of ATPE Technology to Produce Highly Enriched Semiconducting SWCNTs

    SBC: SouthWest NanoTechnologies (SWeNT)            Topic: N/A

    Single-walled carbon nanotubes (SWCNTs) have unique material properties making them very attractive for use in a variety of electronic applications. However, as-grown SWCNTs contain a mixture of tubes with heterogeneous optical and electronic properties. The chiral species must be separated in order to maximize the desired properties. To date, no large scale separation process has been accomplishe ...

    SBIR Phase I 2014 Department of CommerceNational Institute of Standards and Technology
  9. High Energy Density Micro-Ultracapacitors through Tunable Electrolyte Confinement and Directional Transport

    SBC: MAINSTREAM ENGINEERING CORP            Topic: DMEA13B001

    The increasing penetration of MEMs devices into the commercial market has lead to an increasing demand for micro-sized electrical energy storage devices to interface with a support them. Electrochemical double layer capacitors hold significant promise as

    STTR Phase I 2014 Department of DefenseDefense Microelectronics Activity
  10. Innovative Polishing Technology for Fabrication of High Performance Epi-ready GaSb Substrates

    SBC: Sinmat Inc            Topic: MDA12T003

    Antimony containing III-V semiconducting compounds are particularly attractive for the fabrication of a wide variety of electronic and optoelectronic devices such as photo detectors operating in the long wave infrared wavelength (12-32µm) range. The production of epi quality GaSb wafers still remains one of the important problems for rapid commercialization of GaSb devices. In Phase I effort, we ...

    STTR Phase II 2014 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government