You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
STTR Phase I: Flexible Quantum Dot Light Emitting Devices for Photodynamic Therapy and Photobiomodulation
SBC: QLEDCURES LLC Topic: PHThe broader impact of this Small Business Technology Transfer (STTR) Phase I project is to enable a much wider adoption of various photomedical treatments. Broadly speaking, photomedical treatments use light to cure diseases and promote healing. Specifically, photodynamic therapy uses light to activate a photosensitizing chemical agent to kill cancer cells or bacterial with minimal side effects. M ...
STTR Phase I 2019 National Science Foundation -
STTR Phase I: Will stereoscopic 3D imaging improve brain aneurysm diagnosis?
SBC: D3D Technologies Inc Topic: DHThis SBIR Phase I project aims to focus on the challenges neuroradiologists and neurosurgeons experience when visualizing complex brain aneurysms. Brain aneurysms, which occur in 2-3% of the population, are balloon-like dilations of a blood vessel supplying the brain which may rupture and result in severe headaches, paralysis, coma and death. Currently, radiologists viewing Magnetic Resonance Imag ...
STTR Phase I 2019 National Science Foundation -
STTR Phase I: Scalable thermochemical conversion of carbon dioxide to commodity chemical intermediates
SBC: CL CHEMICAL COMPANY Topic: CTThe broader impact/commercial potential of this STTR project is to chemically recycle carbon dioxide, which would otherwise be released to the atmosphere, to useful fuels and products thus providing a closed loop for production and emissions for many common products. Virtually every industry uses petroleum and/or natural gas, either through transportation or plastics (e.g., packaging), and there i ...
STTR Phase I 2019 National Science Foundation -
STTR Phase II: Deep Learning Technology For The Microscopic Analysis Of Stained Cells Using Unbiased Methods
SBC: Stereology Resource Center, Inc Topic: BTThe broader impact/commercial potential of this Small Business Technology Transfer (STTR) Phase II project is the development of software to help bioscientists analyze more tissue in less time and with higher accuracy and reproducibility. Currently, stereology studies require a trained technician to sit before a computer screen, making tedious manual counts (clicks) on hundreds to thousands of mic ...
STTR Phase II 2019 National Science Foundation -
Integrated Sorbent-based Lithium, Power, and Water Recovery from Geothermal Brines
SBC: STRATOFIRE LC Topic: 17aGeothermal brines used in power generation can be a potential source of critical elements, such as lithium. However, current technological approaches cannot achieve high selectivity of target elements available in trace concentrations from a complex geothermal brine matrix with high concentration of non-desirable mineral content. StratoFire and Southern Research propose to develop and optimize an ...
STTR Phase I 2019 Department of Energy -
Novel Treatment of Produced Waters from Shale Gas with Zero Liquid Discharge by Geothermal Heat
SBC: SAVENGY TECHNOLOGIES LLC Topic: 17aVast amounts of impaired waters are produced in gas and oil wells. Energy-efficient desalination systems are needed to treat these waters to produce fresh water and concentrated brines. Mineral recovery systems can also yield valuable critical materials as byproducts. Savengy Technologies and University of Central Florida (UCF) will develop and commercialize an energy efficient system to treat sha ...
STTR Phase I 2019 Department of Energy -
Autonomous Navigation on Icy Moons and Ocean Worlds
SBC: VETH RESEARCH ASSOCIATES, LLC Topic: T4Technology currently used for terrestrial navigation is extremely limited in the challenging environments on icy moons and ocean worlds such as Europa. Autonomous platforms used to collect data from beneath these ice and ocean surfaces cannot depend on access to satellite or any other electromagnetic communication. Autonomous systems in these environments are required to perform highly-complex tas ...
STTR Phase I 2019 National Aeronautics and Space Administration -
Vortex Control for Low-Noise DEP Urban Aircraft
SBC: Surfplasma, Inc. Topic: T15Suppression of noise from aircraft is a vital NASA goal, especially important for the vision of Urban Air Mobility. Small urban aircraft may utilize Distributed Electric Propulsion along with advanced structural and electric motor/storage technologies to achieve the necessary flight capability. However, these aircraft utilize propellers or fans to achieve the necessary thrust, with attendant commu ...
STTR Phase I 2019 National Aeronautics and Space Administration -
Vision-Based Navigation for Formation Flight onboard ISS
SBC: JAYCON SYSTEMS LLC Topic: T11The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...
STTR Phase II 2019 National Aeronautics and Space Administration -
Metal Digital Direct Manufacturing (MDDM) for Close-Out of Combustion Chambers and Nozzle Fabrications
SBC: Keystone Synergistic Enterprises, LLC Topic: T12This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed.Process optimizations will be conducted ...
STTR Phase II 2019 National Aeronautics and Space Administration