You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Blast Overpressure Omnidirectional Measurement Device

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18078

    Mainstream proposes developing a blast overpressure omnidirectional measurement (BOOM) device that detects, records, and transmits captured data for blast events experienced by individual personnel. The BOOM device is composed of a microcontroller that collects, stores, and transmits data collected from several miniature pressure transducers placed on personnel. The sensors enable capture of the p ...

    SBIR Phase I 2019 Department of DefenseArmy
  2. Lightweight, Durable, Low-Cost Recuperators Designed for Integration with Small Turbo-generators for Future Army Unmanned Aerial Systems

    SBC: Florida Turbine Technologies Inc.            Topic: A17001

    FTT proposes to design, build, and test an advanced light-weight, low-cost, and durable additively manufactured recuperator.Testing will be first performed in a component rig with similar engine conditions to increase TRL to 5.Following successful completion of the component rig, FTT will mate the recuperator up with a 5KW turbogenerator and run the assembly at FTT Small Engine Test Facility in or ...

    SBIR Phase II 2019 Department of DefenseArmy
  3. Vascularized Tissue Construction Using Specialized 3D Bioprinting Techniques

    SBC: Lynntech Inc.            Topic: A17068

    Tissue engineering technology is of particular import to the Army for the matter of producing tissue replacements for the repair and regeneration of various organ systems (liver, heart, muscle, lung, etc.) for wounded patients. Unfortunately, the production of masses of tissue with thicknesses greater than ~1 mm presents a challenge due to diffusion limits of nutrients into the tissue and waste ou ...

    SBIR Phase II 2019 Department of DefenseArmy
  4. Monolithic high-power QCL-based photonic integrated circuits for two-dimensional beam steering

    SBC: TransWave Photonics, LLC            Topic: N182109

    TransWave Photonics, LLC in collaboration with the University of Texas at Austin, proposes to demonstrate a mid-infrared 2-dimensional beam-steering photonic integrated circuit (PIC) with a passive InGaAs/InP platform where high performance mid infrared quantum cascade laser sources, low-loss InGaAs waveguides, and beam steering photonic elements are monolithically integrated. Low mid-infrared opt ...

    SBIR Phase I 2019 Department of DefenseNavy
  5. Monolithic Quantum Cascade Laser-based Platform with Electronically Controlled Output Beam Steering

    SBC: IRGLARE, LLC            Topic: N182109

    In response to the NAVY SBIR solicitation N182-109, the IRGLARE team proposes the development of a 4.6m Quantum Cascade Laser (QCL) source delivering >1W of continuous wave (CW) optical power with monolithically integrated 2D beam steering mechanism. The steering angle of the output beam will be electronically controllable in the range of 10 and 25 degrees in the two planes normal to the device em ...

    SBIR Phase I 2019 Department of DefenseNavy
  6. Fooling Computer Vision Classifiers with Adversarial Examples

    SBC: Lynntech Inc.            Topic: N182127

    The Lynntech team proposes to develop a Computer Vision FoolKit system that integrates cutting-edge approaches to systematically evaluate physically realizable adversarial attacks against several leading computer vision classifiers. It has been noted that most deep neural networks are demonstrably vulnerable to adversarial examples, even in the form of small-magnitude changes in intensities of the ...

    SBIR Phase I 2019 Department of DefenseNavy
  7. Nanocomposite Polymer Binders with Reversible Crosslink Architectures

    SBC: Helicon Chemical Company LLC            Topic: N182129

    Many energetic material formulations rely on elastomeric polymer binders to achieve required safety, aging, and mechanical properties. These binder systems are commonly produced by cast-cure methods using HTPB and an isocyanate curative. To take advantage of emerging technologies in weapon design and manufacturing, innovative new binders are needed with tailorable cure/cross-link chemistry, improv ...

    SBIR Phase I 2019 Department of DefenseNavy
  8. Submarine Sensor Environmental Inference

    SBC: KSA, LLC            Topic: N182135

    The Base and Option propose applying machine learning (ML) deep learning (DL) methods to estimate the Waveguide Invariant (WGI). The ML and DL application also provide prior parameterization of the waveguide. Data fusion methods generate Energy Spectral Density (ESD) and Empirical Orthogonal Functions (EOF) to characterize the uncertainty of the sound speed profile in the water column from which t ...

    SBIR Phase I 2019 Department of DefenseNavy
  9. Reliable 5W Continuous Wave Quantum Cascade Lasers with a Nearly Gaussian Circular Output Beam

    SBC: IRGLARE, LLC            Topic: N182113

    In response to the NAVY SBIR solicitation N182-113, the IRGLARE team is pleased to propose the development of highly reliable 4.5m Quantum Cascade Lasers (QCLs) delivering over 5W of continuous wave optical power in a nearly gaussian beam (M2 < 1.5) with a low ellipticity. The combination of the high optical power and long term reliability will be achieved by over a two-fold reduction in laser the ...

    SBIR Phase I 2019 Department of DefenseNavy
  10. Mid-infrared quantum cascade lasers with highly efficient heat extraction architecture

    SBC: TransWave Photonics, LLC            Topic: N182113

    TransWave Photonics, LLC in collaboration with the University of Texas at Austin proposes to demonstrate a new active region and thermal packaging configuration for the mid-wave infrared quantum cascade lasers that provide both high modal overlap with the laser active region and a dramatically reduced thermal impedance of the laser compared to the current state-of-the-art. The proposed laser desig ...

    SBIR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government