You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Electrochemical Drug Infusion Pump

    SBC: LYNNTECH INC.            Topic: OSD05H01

    The CONOPS for the Expeditionary Medical Support System (EMEDS) is based on practical effectiveness, speed, and efficiency. Key among the tools required by the Air Mobility Command and the Air Combat Command, which are two of the major commands that are part of the United Air Force is a multi-channel intravenous infusion pump capable of delivering fluids that meets the safe-to-fly criteria for all ...

    SBIR Phase II 2019 Department of DefenseDefense Health Agency
  2. Developing Software for Pharmacodynamics and Bioassay Studies

    SBC: TConneX Inc.            Topic: DHP16C001

    Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  3. Design and Fabrication of the ¿AODS¿: All-in-One Digitizer System-on-chip

    SBC: NALU SCIENTIFIC, LLC            Topic: 29b

    In this project Nalu Scientific will design, develop, and make commercially available the “AODS”, a fast measurement tool to readout high speed signals generated by particles in particle and high energy physics experiments. Detection of individual charged particles and photons and estimation of their properties, momentum, and direction of arrival is the basis for a wide range of scientific and ...

    SBIR Phase I 2019 Department of Energy
  4. Design And Development Of TR-BHM: Time Resolved Beam

    SBC: NALU SCIENTIFIC, LLC            Topic: 09b

    NSL recognizes the need within the accelerator community for robust and accurate beam halo monitoring detectors. Non-idealities in the accelerating equipment, uncertainties in current machine controls, and random noise driven fluctuations all combine to diminish the quality and focus of accelerated charged particle beams which results in degradation of the resulting physics, losses which decrease ...

    SBIR Phase I 2019 Department of Energy
  5. Large-Aperture 6 T Dipole for Ion Storage Ring

    SBC: Accelerator Technology Corporation            Topic: 30g

    ATC requests Phase 1 SBIR funding to develop a 2-layer NbTi Cable-in-Conduit (CIC) conductor suitable for a large-aperture 6 T dipole. ATC has successfully developed a single-layer 13 kA NbTi CIC cable, and our collaborators at Texas A&M University (TAMU) have successfully used it to make a 3 T dipole suitable for the arcs of a 100 GeV Ion Ring that has until now been the baseline design for JLEIC ...

    SBIR Phase I 2019 Department of Energy
  6. Low-cost and Efficient Cooling of on-Detector Electronics Using Conformal Thermoelectric Modules

    SBC: NANOHMICS INC            Topic: 29d

    Thermoelectric coolers (TECs) are solid-state devices with no moving parts and working fluids to provide reliable cooling power compared to traditional cooling systems such as vacuum compressors. However, their relatively high cost, small form factor and low efficiency have relegated them to niche applications such as small scaled portable coolers and yet to justify the large volume cooling compet ...

    SBIR Phase I 2019 Department of Energy
  7. High Force Spring Clamp System-A system to substitute spring clamps for bolts when connecting Superconducting RF Cavities in Order to Greatly Reduce Particulate Generation in a Clean Room Environment

    SBC: HYPERBOLOID LLC            Topic: 30a

    This proposal for an SBIR project is to design and develop a simple system to assemble and seal the vacuum joints of SRF Cavities. The System substitutes highly sprung,“C” shaped spring clamps for bolts and nuts for applying sealing force on the metallic gaskets of cavity flanges. The system minimizes particle generation during assembly in the clean room by avoiding the rubbing/shedding contac ...

    SBIR Phase I 2019 Department of Energy
  8. A Novel Catalytic Reactor For Conversion Of CO2 Into Benzene

    SBC: SUSTEON INC            Topic: 22c

    Almost 15 million metric tons per year of essentially pure CO2 is captured in the United States from ethanol, hydrogen, ammonia, and natural gas processing plants. Some of this CO2 is used for merchant applications such as food and beverage and other applications, but a large portion of this captured CO2 is emitted to the atmosphere. This CO2 can be converted into high value chemicals, but the key ...

    SBIR Phase I 2019 Department of Energy
  9. Diode lasers and Small Nanoparticulate Matrices Combine to Elevate Sensitivity of MILDI-MSI

    SBC: IONWERKS INC            Topic: 24a

    Imaging of molecular components of plant tissue (roots, leaves, seeds etc.) by microfocused laser desorption is maturing into a useful tool for describing plant molecular biology. Due to pioneering work in DOE laboratories and elsewhere the detection sensitivity of laser desorbed molecules is increased by the addition microscale sized colloidal metals (e.g. Sliver) or graphite to aid as a “matri ...

    SBIR Phase I 2019 Department of Energy
  10. Tensor Core Based Algorithms For Cryo Electron Microscopy

    SBC: LIGO ANALYTICS INC            Topic: 01a

    Cryo-electron microscopy is a powerful imagining technique that can generate highly accurate structural models for macromolecules larger than 200 kDa. However, for macromolecules having smaller masses, the amount of information used to generate structural models is frequently insufficient to result in successful structure determination. The barrier defined by macromolecular mass arises from cryo-E ...

    SBIR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government