List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Blast Overpressure Omnidirectional Measurement Device

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18078

    Mainstream proposes developing a blast overpressure omnidirectional measurement (BOOM) device that detects, records, and transmits captured data for blast events experienced by individual personnel. The BOOM device is composed of a microcontroller that collects, stores, and transmits data collected from several miniature pressure transducers placed on personnel. The sensors enable capture of the p ...

    SBIR Phase I 2019 Department of DefenseArmy
  4. Monolithic Beam Steerer for High Power Mid-infrared Quantum Cascade Lasers

    SBC: Omega Optics, Inc.            Topic: N182109

    In this SBIR program, Omega Optics, University of Texas, Austin and Adtech Photonics propose a complete monolithic epitaxial device, with no wafer bonding, for surface emitting 2D non-mechanical optical beam steering at 4.6 micron wavelength. Two methods will be investigated: first, with slant etch normal emitters for azimuthal and elevation steering at a single wavelength using thermal phase shif ...

    SBIR Phase I 2019 Department of DefenseNavy
  5. Monolithic high-power QCL-based photonic integrated circuits for two-dimensional beam steering

    SBC: TransWave Photonics, LLC            Topic: N182109

    TransWave Photonics, LLC in collaboration with the University of Texas at Austin, proposes to demonstrate a mid-infrared 2-dimensional beam-steering photonic integrated circuit (PIC) with a passive InGaAs/InP platform where high performance mid infrared quantum cascade laser sources, low-loss InGaAs waveguides, and beam steering photonic elements are monolithically integrated. Low mid-infrared opt ...

    SBIR Phase I 2019 Department of DefenseNavy
  6. Monolithic Quantum Cascade Laser-based Platform with Electronically Controlled Output Beam Steering

    SBC: IRGLARE, LLC            Topic: N182109

    In response to the NAVY SBIR solicitation N182-109, the IRGLARE team proposes the development of a 4.6m Quantum Cascade Laser (QCL) source delivering >1W of continuous wave (CW) optical power with monolithically integrated 2D beam steering mechanism. The steering angle of the output beam will be electronically controllable in the range of 10 and 25 degrees in the two planes normal to the device em ...

    SBIR Phase I 2019 Department of DefenseNavy
  7. EROSION RESISTANT HYBRIDSIL ICEPHOBIC COATINGS FOR AIRCRAFT PROPULSION TURBOMACHINERY INLET COMPONENTS

    SBC: Nanosonic Inc.            Topic: N182115

    Through the proposed Navy SBIR program, NanoSonic will molecularly engineer and empirically optimize its HybridSil Icephobic coating technology for imparting long-term passive ice protection to aircraft propulsion turbomachinery inlet components. Unlike competing icephobic coating technologies that rely on unreacted, surface enriching / lubricating oils that impart temporary ice protection, NanoSo ...

    SBIR Phase I 2019 Department of DefenseNavy
  8. WAHTER- Wearable Aircrew Hydration Tracking and Extended Recording

    SBC: Luna Innovations Incorporated            Topic: N182114

    Dehydration is a significant issue for both military and civilian personnel. However, it is of increased concern in the military fast-jet environment. Due to inconvenient urine relief mechanisms, aircrew can often become dehydrated over the course of an extended mission, whether intentionally or inadvertently. Dehydration is known to result in cognitive shortcomings, and given the complex nature o ...

    SBIR Phase I 2019 Department of DefenseNavy
  9. Multifunction-Multimodal Airborne Radar in Maritime/Littoral Environments

    SBC: Azure Summit Technology, Inc.            Topic: N182120

    Airborne surveillance radars continue to advance towards more flexible architectures that enable them to address evolving adversary tactics facilitated by global proliferation of RF and High Performance Embedded Computing (HPEC) technologies. Aided by these technologies, the adversary can use multiple electronic counter measures that can confuse traditional monostatic radars and obscure the true o ...

    SBIR Phase I 2019 Department of DefenseNavy
  10. Effect of Surface Finish and Post-Processing on the Fatigue Life of Additively Manufacturing Parts

    SBC: TECHNICAL DATA ANALYSIS, INC.            Topic: N182126

    Additive manufacturing technology is becoming more popular for the fabrication of 3D metal products as it offers rapid prototyping and large design freedom. However, with more complex geometric features due to topology optimization, it becomes infeasible to carry out traditional surface machining process to improve surface roughness for fatigue performance. In this effort, we will develop a novel ...

    SBIR Phase I 2019 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government