You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Heterogeneous Silicon Photonics OFDR Sensing System

    SBC: Luna Innovations Incorporated            Topic: T8

    Luna will team with Dr. John Bowers of UCSB to continue development of an Optical Frequency Domain Reflectometry (OFDR) system-on-chip using heterogeneous silicon photonics to enable a minimal weight structural health monitoring system. This system-on-chip will be the building block for distributed sensing interrogation systems that are the size of a deck of playing cards. This lightweight, rugged ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. STTR Phase I: Flexible Quantum Dot Light Emitting Devices for Photodynamic Therapy and Photobiomodulation

    SBC: QledCures LLC            Topic: PH

    The broader impact of this Small Business Technology Transfer (STTR) Phase I project is to enable a much wider adoption of various photomedical treatments. Broadly speaking, photomedical treatments use light to cure diseases and promote healing. Specifically, photodynamic therapy uses light to activate a photosensitizing chemical agent to kill cancer cells or bacterial with minimal side effects. M ...

    STTR Phase I 2019 National Science Foundation
  3. STTR Phase I: Wireless Vibration Micro-Sensors for None Intrusive Real Time Monitoring

    SBC: LORAND TECHNOLOGIES INC            Topic: EW

    The broader impact/commercial potential of this project is mainly in the area of machine condition monitoring. Vibration monitoring is an integral part of any machine condition monitoring regimen. All equipment that comprise belts, gears, bearings, drive motors, or other moving components have a specific vibration signature during normal operating cycles. Change in equipment vibration serves as an ...

    STTR Phase I 2019 National Science Foundation
  4. STTR Phase I: Motion Assisted Hand Exoskeleton with Virtual Reality (MAVHEXO) for Post Stroke Rehabilitation

    SBC: NEUROLOGICAL REHABILITATION VIRTUAL REALITY, L.L.C.            Topic: MD

    This Small Technology Transfer Phase I project will realize a sensorized soft robotic hand exoskeleton coupled with an interactive 3D virtual reality (VR) gaming environment that provides fine motor training for stroke patients' hands. There is a currently a lack of available devices that provide fine sensory and motor training of the hand. The potential benefit is to fill this niche market opport ...

    STTR Phase I 2019 National Science Foundation
  5. Thin Film Deposition of Highly Conductive Metals for Sensor Applications- Phase II

    SBC: Summit Information Solutions, Inc.            Topic: A17AT001

    Deposition of highly conductive, continuous thin film metals has proven to be a significant challenge. There are several techniques that allow deposition of these metals, but their application is limited to planar surfaces and only offer complete line of sight deposition. During a recent Phase I STTR project, Summit Information Solutions, Inc. (Summit), in partnership with University of Alabama in ...

    STTR Phase II 2019 Department of DefenseArmy
  6. Developing Software for Pharmacodynamics and Bioassay Studies

    SBC: TConneX Inc.            Topic: DHP16C001

    Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  7. Scanning Tunneling Microscope based Hydrogen Depassivation Lithography Automation Via Artificial Intelligence

    SBC: Zyvex Labs LLC            Topic: 16a

    Atomically Precise Manufacturing will bring enormous energy savings through improved efficiency in power generation and use, via light weighting, reduced friction and wear, and a host of other improvements in materials and active mechanisms. Atomically Precise Manufacturing will bring considerable benefit to our technology, economy, and standard of living. However, significant technological develo ...

    STTR Phase I 2019 Department of Energy
  8. A Graphene Enhanced SiC- SiC Ceramic Composite Bonding Solution for Generation IV

    SBC: MC Technologies LLC            Topic: 20b

    Ceramic matrix SiC-SiC composites are currently the leading candidate for Generation IV nuclear reactor fuel cladding and other structural components, due to their excellent thermal and chemical stability under extreme conditions. However, robustly joining SiC structures when exposed to such harsh operating conditions still presents a major roadblock. A novel bonding joint compound leveraging grap ...

    STTR Phase I 2019 Department of Energy
  9. Highly Transparent Aerogel with Refractive Index < 1.01 for High Energy Particle Detection

    SBC: Scintilex, LLC            Topic: 31d

    Cherenkov radiation, caused by fast charged particles in a transparent medium, is widely used for charged particle identification. To date, gaseous, liquid, and solid radiators have been used as sources of Cherenkov radiation. Aerogels with low refractive index and high light transmittance, are highly desirable for Cherenkov detectors. Development and testing of aerogels with a refractive index as ...

    STTR Phase I 2019 Department of Energy
  10. Segmented and Blocky Proton Conducting Membranes for Solar Fuels Generator Applications

    SBC: Nanosonic Inc.            Topic: 19b

    The Department of Energy’s Office of Basic Energy Sciences has identified a need for new proton conducting membranes for solar fuel generator applications. Specifically, development of block copolymers with good proton conductivity at ambient temperatures and low gas diffusion and ionic transports are needed. There are currently no commercially available proton conducting membranes which possess ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government