You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Heterogeneous Silicon Photonics OFDR Sensing System

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: T8

    Luna will team with Dr. John Bowers of UCSB to continue development of an Optical Frequency Domain Reflectometry (OFDR) system-on-chip using heterogeneous silicon photonics to enable a minimal weight structural health monitoring system. This system-on-chip will be the building block for distributed sensing interrogation systems that are the size of a deck of playing cards. This lightweight, rugged ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. Developing Software for Pharmacodynamics and Bioassay Studies

    SBC: TConneX Inc.            Topic: DHP16C001

    Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  3. STTR Phase II: Deep Learning Technology For The Microscopic Analysis Of Stained Cells Using Unbiased Methods

    SBC: Stereology Resource Center, Inc            Topic: BT

    The broader impact/commercial potential of this Small Business Technology Transfer (STTR) Phase II project is the development of software to help bioscientists analyze more tissue in less time and with higher accuracy and reproducibility. Currently, stereology studies require a trained technician to sit before a computer screen, making tedious manual counts (clicks) on hundreds to thousands of mic ...

    STTR Phase II 2019 National Science Foundation
  4. A Multi-channel Radiation-tolerant, Low-power, High-speed, and Resolution Analog-to-Digital Converter for Nuclear Physics Detectors

    SBC: APOGEE SEMICONDUCTOR, INC.            Topic: 28b

    Cost-effective and power-efficient radiation tolerant semiconductors are needed in various harsh environments, such as particle detectors, communication satellites, high-altitude avionics and medical imagining equipment. These include amplifiers, voltage regulators, analog-to-digital converters (ADCs) and digital logic circuitry. However, radiation-tolerant high-speed ADCs currently cost more than ...

    STTR Phase II 2019 Department of Energy
  5. Permanent Magnet (PM) Induction Heater for Paraffin Abatement

    SBC: AUSTIN GEOTECH SERVICES INC            Topic: 20b

    There are an estimated 1.7 million oil and gas wells in the United States, 771,000 of these are considered marginal producers. Combined they make up 11.3% of the US oil production and 8.3% of the US gas production. In that last 10 years, over 131,000 of these oil wells and 48,000 gas wells have been plugged and abandoned. Most of these wells suffer from paraffin plugging problems. The only way to ...

    STTR Phase II 2019 Department of Energy
  6. High Performance Substrate Embedded Microgrids for High Efficiency, Flexible Organic Light Emitting Diodes

    SBC: ELECTRONINKS INCORPORATED            Topic: 09b

    Indium tin oxide (ITO) films are currently the most widely used transparent conductor in optoelectronic applications. However, ITO suffers from several major technological and economic limitations for large area applications such as inadequate performance, high cost, and brittleness. The primary objective of this Small Business Technology Transfer (STTR) Phase I/Phase II project is to develop the ...

    STTR Phase II 2019 Department of Energy
  7. Real-Time Distributed Quench Detection In High Temperature Superconductor Magnets

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: 20a

    Nuclear fusion has great potential for supplying global energy needs with a clean, abundant energy source. Advanced superconducting magnets will be used to contain the plasma at the center of the reactor. To operate these magnets, new sensors are needed to monitor the superconductors in real-time to detect the signs that the superconductor may quench (lose superconducting properties), so that corr ...

    STTR Phase II 2019 Department of Energy
  8. Advanced Structural Health Monitoring

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: T12

    Frequency selective surfaces (FSSs) are periodic arrays of conductive elements/patches that cause a particular reflection response when illuminated with high frequency electromagnetic energy. nbsp;These arrays arenbsp;used for high frequency filters and in antenna applications.nbsp; We propose to use FSSs as multi-functional sensors. nbsp;FSS sensors are unpowered, low-profile (thin), wireless and ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  9. Vision-Based Navigation for Formation Flight onboard ISS

    SBC: JAYCON SYSTEMS LLC            Topic: T11

    The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  10. Metal Digital Direct Manufacturing (MDDM) for Close-Out of Combustion Chambers and Nozzle Fabrications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T12

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed.Process optimizations will be conducted ...

    STTR Phase II 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government