You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Developing Software for Pharmacodynamics and Bioassay Studies

    SBC: TConneX Inc.            Topic: DHP16C001

    Thegoal is to develop asoftwaretool that implementsa novelapproach applicableto fitgeneral pharmacologic, toxicology, or other biomedical data, that mayexhibita non-monotonic dose-responserelationship for which thecurrent parametricmodels fail. Thesoftwareexplores dose-responserelationships using both monotonicand non-monotonicmodels,and estimates theassociated doseresponsecurves,which can further ...

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  2. Smart Baseplate for Additive Manufacturing

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods, or for fabrication of small quantities of complex parts. One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made. This is especially critical given the rel ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  3. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  4. Lightweight Structural Components of a Missile Body

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: MDA17T004

    A significant weight reduction on missile platforms could increase maneuverability of the payload and allow more capable payloads. High temperature composite materials offer the means by which low cost and lighter weight missile structures can be achieved. Approved for Public Release 19-MDA-10203 (4 Sep 19)

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  5. Large Component, High-quality Composite Fabrication Using Nanocarbon Heating Films

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N18BT031

    Autoclaves are typically used to fabricate high-quality composite components with acceptable thermal properties and low void volume. They provide elevated temperature processing cycles and external pressure required for adequate compaction to achieve these desired properties. However, autoclaves represent large capital and energy investment while limiting the size of fabricated parts and productio ...

    STTR Phase I 2019 Department of DefenseNavy
  6. Carbon Nanotube-Based Heater Coatings for Processing of Thermosetting and Thermoplastic Composites

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N18BT031

    For this research program, Mainstream will collaborate with Colorado State University (CSU) to develop a nanostructured heater capable of curing aerospace grade composites out-of-autoclave (OOA). The use of autoclaves is the primary cost driver in composite manufacturing due to size limitations, long processing times, and inefficient energy usage. Therefore, the Navy is looking to develop a nanost ...

    STTR Phase I 2019 Department of DefenseNavy
  7. Collective Meta-Reasoning Runtime Assurance of Machine Intelligence for Unmanned Autonomous Vehicles

    SBC: BARRON ASSOCIATES, INC.            Topic: N18BT032

    Barron Associates has teamed with a prominent researcher in the field of formal verification of cyber physical systems to propose a new paradigm in runtime assurance for complex autonomous systems controlled and operated by artificial machine intelligence. A two-stage approach is considered in which formal verification processes are first performed offline at algorithm design time. Online, during ...

    STTR Phase I 2019 Department of DefenseNavy
  8. Process to Mitigate Catastrophic Optical Damage to Quantum Cascade Lasers

    SBC: IRGLARE LLC            Topic: N19AT004

    The development of a catastrophic optical damage model for quantum cascade lasers describing instantaneous laser damage at high optical power levels is proposed. The model will be validated by comparison to experimental data. Based on obtained results, changes to laser design and laser fabrication resulting in an increased damage threshold will be implemented. The work will ultimately result into ...

    STTR Phase I 2019 Department of DefenseNavy
  9. GECCO: Gecko-gripper for EOD with Cavitation Cleaning Operation

    SBC: VALOR ROBOTICS, LLC            Topic: N19AT011

    The objective of the Phase I proposal is to investigate the application of controlled cavitation cleaning technology in conjunction with gecko-inspired mechanical adhesion and soft elastomeric applicators for use in non-intrusive EOD operations. This investigation requires the proof-of-concept testing and validation of a controlled cavitation cleaning mechanism, and a soft robotic gecko-inspired m ...

    STTR Phase I 2019 Department of DefenseNavy
  10. Remotely Operated Vehicle (ROV) Deployed Underwater Attachment

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: N19AT011

    Texas Research Institute Austin, Inc. (TRI/Austin) and Florida Institute of Technology (FIT) in the Phase I effort will implement the use of a revolutionary new class of adhesives to attach C4 to underwater mines. These adhesives are extraordinarily insensitive to water, tolerant of unprepared surfaces, and offer extremely rapid cure and excellent bond strength. These materials can be applied usin ...

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government