You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Efficient cFS-based On-board Lamberts Solution for DSMs

    SBC: Advanced Space LLC            Topic: T11

    Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. High Energy Density, Long Cycle Life and Safe Li-S Battery

    SBC: ADA Technologies, Inc.            Topic: A17050

    The U.S. Army has identified a need for improved soldier and device mobility. To address these needs, ADA Technologies Inc. (ADA) will develop and commercialize our high energy density, long cycle life and safe lithium-sulfur (Li-S) battery technology. Our solution is based on proven material design strategies that will improve cell constituent stability via the use of atomic level coatings on the ...

    SBIR Phase I 2019 Department of DefenseArmy
  3. A Sparse Information Processing Refinery for Aviation Sustainment

    SBC: Oceanit Laboratories, Inc.            Topic: A18004

    Oceanit proposes to develop a Sparse Information Processing Refinery (SIPR) targeted to the sustainment of aviation platforms, which is a graphical environment for managing and extracting information from aviation data.Unlike most existing platforms, SIPR is designed for the case where data are sparse and/or difficult to obtain.To make the most of a limited data set, SIPR leverages recent advances ...

    SBIR Phase I 2019 Department of DefenseArmy
  4. Wireless Blast Gauge with BOP Impulse Noise Tracking for Artillery & Mortar Personnel

    SBC: BLACKBOX BIOMETRICS, INC.            Topic: A18078

    We propose advancing our proven Wireless Blast Gauge System to extend the BOP range to capture impulse noise. Ultimately, the Blast Gauge System will be integrated with the weapons DFCS to automatically provide data to the crew chief and platoon / battery leadership to support informed decisions during live fire training and combat missions.

    SBIR Phase I 2019 Department of DefenseArmy
  5. Blast Overpressure Omnidirectional Measurement Device

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18078

    Mainstream proposes developing a blast overpressure omnidirectional measurement (BOOM) device that detects, records, and transmits captured data for blast events experienced by individual personnel. The BOOM device is composed of a microcontroller that collects, stores, and transmits data collected from several miniature pressure transducers placed on personnel. The sensors enable capture of the p ...

    SBIR Phase I 2019 Department of DefenseArmy
  6. Development of a Stochastic Multi-dimensional Fire Modeling and Simulation Software Package

    SBC: ADA Technologies, Inc.            Topic: A17073

    Fire can act extremely quickly in military shelters. Improving fire safety begins with understanding the fire dynamics associated with each system. All current shelters are evaluated for fire safety on a component basis only; there are no specifications for how the overall system design relates to generation of flame, heat, and smoke. As such, the Army needs a three-dimensional, reliable and valid ...

    SBIR Phase II 2019 Department of DefenseArmy
  7. UHF L-band Transmitter Receiver Antenna (ULTRA)

    SBC: First RF Corporation            Topic: A17040

    The Department of Defense depends on multiple systems to establish and update position information of our forces on the battlefield. However, the current interfacing capability for position location information (PLI) systems is limited to a select few service providers. By adding flexibility to the RF media interface for these systems, new levels of connectedness and reliability can be achieved, p ...

    SBIR Phase II 2019 Department of DefenseArmy
  8. Lightweight, Durable, Low-Cost Recuperators Designed for Integration with Small Turbo-generators for Future Army Unmanned Aerial Systems

    SBC: Florida Turbine Technologies Inc.            Topic: A17001

    FTT proposes to design, build, and test an advanced light-weight, low-cost, and durable additively manufactured recuperator.Testing will be first performed in a component rig with similar engine conditions to increase TRL to 5.Following successful completion of the component rig, FTT will mate the recuperator up with a 5KW turbogenerator and run the assembly at FTT Small Engine Test Facility in or ...

    SBIR Phase II 2019 Department of DefenseArmy
  9. Vascularized Tissue Construction Using Specialized 3D Bioprinting Techniques

    SBC: Lynntech Inc.            Topic: A17068

    Tissue engineering technology is of particular import to the Army for the matter of producing tissue replacements for the repair and regeneration of various organ systems (liver, heart, muscle, lung, etc.) for wounded patients. Unfortunately, the production of masses of tissue with thicknesses greater than ~1 mm presents a challenge due to diffusion limits of nutrients into the tissue and waste ou ...

    SBIR Phase II 2019 Department of DefenseArmy
  10. Lead Acid Battery Monitoring, Diagnostics, and Prognostics

    SBC: Oceanit Laboratories, Inc.            Topic: A17023

    In this Phase II, Oceanit proposes to further the impedance approach and battery analyzer device developed in Phase I to demonstrate an optimized technique for monitoring, diagnosis and prognosis of lead acid batteries. Oceanit shall design an integrated lead-acid battery health monitoring tool prototype for testing in an operationally relevant environment. Impedance model will be further refined ...

    SBIR Phase II 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government