You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Non-collinear Wave-front Curvature Range Measurement

    SBC: Mikel, Inc.            Topic: N02025

    The goal of this Phase II SBIR is to extract more information from existing submarine acoustic sensors through a highly innovative inter- and intra-sensor correlation algorithmic, in order to provide U.S. submarines with increased acoustic superiority over increasingly quiet adversaries. U.S. adversaries are continuously improving their acoustic quieting technologies through efforts such as marine ...

    SBIR Phase II 2019 Department of DefenseNavy
  2. Solid State Radar Emitter Identification

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N171043

    The ultimate goal of this SBIR effort is to deliver improvements to existing Fleet electronic warfare support systems by using statistical learning techniques to aid in the classification and unique identification of modern radar emitters. Since software-defined and solid-state emitters do not have the analog features traditionally used for classification, we will use more abstract, but well-defin ...

    SBIR Phase II 2019 Department of DefenseNavy
  3. Electro-Magnetic Interference Composite Rigid Wall Shelter (EMI CRWS)

    SBC: Conductive Composites Company, L.L.C.            Topic: N172103

    Rigid Wall Shelters (RWS) are an integral building block for Marine Corp operations and support a multitude of operational needs from maintenance and repair operations to command posts and medical operations. There are several critical operational deficiencies with metal RWS. The weight of legacy systems and lack of insulation result in a high cost to transport and difficulty heating and cooling i ...

    SBIR Phase II 2019 Department of DefenseNavy
  4. Rapid Prototype Portable Combat and Launch System

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N95053

    SEA CORP will leverage the innovative technologies developed under the prior SBIR Phase II project and extend the Research & Development (R&D) activities to the development of critical submarine combat system payload integration efforts. In the previous effort, components were successfully developed facilitating integration of Improved Submarine Launched Mobile Mine (ISLMM) capability aboard subma ...

    SBIR Phase II 2019 Department of DefenseNavy
  5. Innovative Velocity Sensors

    SBC: Btech Acoustics, LLC            Topic: N141026

    This project involves the development of innovative acoustic motion (accelerometer) sensors with increased tolerances to shock and improving commercial readiness. Investigations and developments of sensor that can withstand is considered.

    SBIR Phase II 2019 Department of DefenseNavy
  6. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Storagenergy Technologies, Inc.            Topic: N18AT008

    The objective of the efforts being proposed is to develop high energy density and power density batteries with long cycle life by high-speed additive manufacturing technologies.

    STTR Phase II 2019 Department of DefenseNavy
  7. Open Architecture Tools to Describe Automatic Test Equipment (ATE) Capabilities

    SBC: WESTEST ENGINEERING CORPORATION            Topic: N181009

    Develop innovative methods and associated tools to support the definition of Automatic Test Equipment (ATE) capabilities and their individual instruments using an Open Architecture (OA) approach, to allow for precise understanding of the ATE, interoperability across Navy and DoD electronics maintenance, and improved utilization of Commercial Off-The-Shelf (COTS) tools to support ATE operations. Th ...

    SBIR Phase II 2019 Department of DefenseNavy
  8. Submarine Sensor Environmental Inference

    SBC: High Rez Consulting, LLC            Topic: N182135

    Within the increasingly contested undersea operational arena, the Navy needs a tactical and competitive advantage in undersea sensing and detection through improved situational awareness with respect to environmental parameters, such as sound speed profile (SSP) and bottom properties, that affect overall submarine sonar sensor performance. Current approaches for enhancing environmental situational ...

    SBIR Phase II 2019 Department of DefenseNavy
  9. Portable Friction Stir Welding Technology for Aluminum Fabrication

    SBC: Advanced Metal Products Inc.            Topic: N07T032

    During Phase I, goals of initial design and demonstration of system concepts for a portable friction stir welding (FSW) system were successfully completed. During Phase II, the objective is to design, fabricate, and demonstrate a portable and versatile FSW system. To support AMP’s design, BYU will continue engineering and application studies in parallel with the design effort. BYU will optimize ...

    STTR Phase II 2009 Department of DefenseNavy
  10. High Power, High Repetition Rate, Pulsed, Blue Laser for ASW Purposes

    SBC: HOPE TECHNOLOGIES, INC.            Topic: N07114

    A yb laser at 976 nm is a three level system. By placing Sm in the core (to reduce stimulated emission above 1,000 nm) and Yb in a surrounding ring, a more efficient laser at 976 nm can be obtained. This will be Q-switched to serve as the first stage of a pulse source in a MOPA configuration. The second stage will be a HOM fiber designed to amplify the pulses from the first stage. With a HOM fiber ...

    SBIR Phase II 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government