Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Rapid Prototype Portable Combat and Launch System

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N95053

    SEA CORP will leverage the innovative technologies developed under the prior SBIR Phase II project and extend the Research & Development (R&D) activities to the development of critical submarine combat system payload integration efforts. In the previous effort, components were successfully developed facilitating integration of Improved Submarine Launched Mobile Mine (ISLMM) capability aboard subma ...

    SBIR Phase II 2019 Department of DefenseNavy
  2. Solid State Radar Emitter Identification

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N171043

    The ultimate goal of this SBIR effort is to deliver improvements to existing Fleet electronic warfare support systems by using statistical learning techniques to aid in the classification and unique identification of modern radar emitters. Since software-defined and solid-state emitters do not have the analog features traditionally used for classification, we will use more abstract, but well-defin ...

    SBIR Phase II 2019 Department of DefenseNavy
  3. Resolving organizational inefficiencies through crowdsourcing

    SBC: SONALYSTS, INC.            Topic: N172131

    Phase I research resulted in an overall framework and set of component algorithms for the Visual Argumentation for Resolving Inefficiencies (VARI) platform. VARI uses best-in-breed algorithms and a novel visual interface to enable contributors to better structure their arguments and increase the quality of contributions of the system. Through standardized, yet adaptable processes, contributors can ...

    SBIR Phase II 2019 Department of DefenseNavy
  4. Non-collinear Wave-front Curvature Range Measurement

    SBC: Mikel, Inc.            Topic: N02025

    The goal of this Phase II SBIR is to extract more information from existing submarine acoustic sensors through a highly innovative inter- and intra-sensor correlation algorithmic, in order to provide U.S. submarines with increased acoustic superiority over increasingly quiet adversaries. U.S. adversaries are continuously improving their acoustic quieting technologies through efforts such as marine ...

    SBIR Phase II 2019 Department of DefenseNavy
  5. Portable Friction Stir Welding Technology for Aluminum Fabrication

    SBC: Advanced Metal Products Inc.            Topic: N07T032

    During Phase I, goals of initial design and demonstration of system concepts for a portable friction stir welding (FSW) system were successfully completed. During Phase II, the objective is to design, fabricate, and demonstrate a portable and versatile FSW system. To support AMP’s design, BYU will continue engineering and application studies in parallel with the design effort. BYU will optimize ...

    STTR Phase II 2009 Department of DefenseNavy
  6. High Fidelity Clutter Model for Active Sonar

    SBC: Applied Physical Sciences Corp.            Topic: N08056

    The results of the Phase I effort demonstrated the feasibility of constructing a realistic, high fidelity active sonar clutter model that is not computationally intensive. Our first objective is to create a library of clutter objects based on statistical descriptors extracted from existing sonar databases. Our second objective is to create several surrogate acoustic environments using range depend ...

    SBIR Phase II 2009 Department of DefenseNavy
  7. Erosion Resistance Coatings for Composite Propulsor/Fan Blades

    SBC: HONTEK CORP.            Topic: N07097

    Fiber glass reinforced polymers (FRP) are used in building the structural components for ships and aircraft. As a structural part, these materials are very rigid and strong. However, they do not perform well in a cavitating environment, and they can be eroded by sand or rain fairly quickly. These deficiencies are especially serious for the propulsion and lift fans for air-cushion vehicles such as ...

    SBIR Phase II 2009 Department of DefenseNavy
  8. High Power, High Repetition Rate, Pulsed, Blue Laser for ASW Purposes

    SBC: HOPE TECHNOLOGIES, INC.            Topic: N07114

    A yb laser at 976 nm is a three level system. By placing Sm in the core (to reduce stimulated emission above 1,000 nm) and Yb in a surrounding ring, a more efficient laser at 976 nm can be obtained. This will be Q-switched to serve as the first stage of a pulse source in a MOPA configuration. The second stage will be a HOM fiber designed to amplify the pulses from the first stage. With a HOM fiber ...

    SBIR Phase II 2009 Department of DefenseNavy
  9. Marine Assessment, Decision, and Planning Tool for Protected Species (MADPT PS)

    SBC: Marine Acoustics, Inc.            Topic: N08054

    The ultimate objective of this SBIR project is the development of a software-based tool that provides environmental planners, synthetic trainers, and scientific researchers with access to scientific data on marine species. Ready access to pertinent information about a marine species, such as distribution, density, and behavior, is vital for making informed science-based decisions concerning the ma ...

    SBIR Phase II 2009 Department of DefenseNavy
  10. Advanced Sabot System Design

    SBC: SIMULATIONS, LLC            Topic: N08053

    Simulations, LLC, a privately held small-business engineering company, and team members DR Technologies and their wholly-owned subsidiary V-System Composites, 3TEX, and Douglas J. Elder propose to implement the lessons learned in Phase I SBIR N08-053, Contract N6553B-OB-M-0094, and design and fabricate a lightweight, high-strength Advanced Sabot System Design (ASSD) with a parasitic mass of 25% or ...

    SBIR Phase II 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government