You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Digital Processing Inspection Verification for the Production Environment

    SBC: Delta Sigma Company LLC            Topic: AF182090

    This proposal describes 6 technologies that will function synergistically to greatly enhance both production and sustainment operations, by verifying part and tool use and storage, task completion, and FOD prevention.DSC proposes to develop and demonstrate a Digital Process Inspection Verification (DPIV) that displays point of use, step-by-step assembly guidance instructions while verifying and do ...

    SBIR Phase I 2019 Department of DefenseAir Force
  2. Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need

    SBC: BLIND TIGER COMMUNICATIONS            Topic: AF183005

    Current Class 1 UAS technology relies on Line of Sight (LOS) Wi-Fi which operates across unlicensed wireless bands. Beyond Visual Line of Sight (BVLOS) technology represents a huge advancement to the already widespread commercial UAS global community. BVLOS uses the mobile cellular network to provide command and control to the devices, removing the cost and technical barriers for near global cover ...

    SBIR Phase I 2019 Department of DefenseAir Force
  3. Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need

    SBC: American Maglev Technology of Florida, Inc.            Topic: AF183005

    The Holloman Maglev Track (HMT) was developed by the Air Force in order to magnetically move a rocket sled system which allows the Air Force to test missiles, ejection seats and other mission critical systems that must be demonstrated and validated at the high speeds at which these important systems would be deployed.The HMT system consists of a rocket propelled sled that is affixed with low tempe ...

    SBIR Phase I 2019 Department of DefenseAir Force
  4. Training the Industrial Cybersecurity Workforce with Games and Graphics

    SBC: Fortiphyd Logic Inc            Topic: AF183006

    Despite the abundance of free online resources and increased research into innovative training techniques, the shortage of cybersecurity skills in the workforce continues. Recent reporting estimates that there may be up to 3.5 million unfilled jobs in the cybersecurity industry by the year 2021, and unfortunately, the skills gap in the specific area of cybersecurity for industrial control systems ...

    SBIR Phase I 2019 Department of DefenseAir Force
  5. Biometric IoT System for Air Force

    SBC: FireHUD, Inc.            Topic: AF191005

    FireHUD has developed a real-time, IoT solution for monitoring and analyzing the biometrics of individuals and groups. The solution is currently in use in the firefighting industry but can be applied to any scenario where aggregated group monitoring of physiological status is warranted. The system monitors biometrics through the use of a non-invasive, arm-worn device which provides hands-free coll ...

    SBIR Phase I 2019 Department of DefenseAir Force
  6. Resilient and Agile AEHF Communications: 3D Multi-Directional, Phased-Array Antennas

    SBC: Dujud LLC            Topic: AF191009

    Advanced Extremely High Frequency (AEHF) is a vital military satellite communication system that manages strategic military operations, classified information, and mm-wave communication. Consequently, reliable and secure operation of the AEHF is always a top priority, which necessitates that communications between AEHF satellites and intended targets (air, ground, and sea) be as resilient and agil ...

    SBIR Phase I 2019 Department of DefenseAir Force
  7. Advanced back-illuminated CMOS image sensors for adaptive optics applications

    SBC: SCIMEASURE ANALYTICAL SYSTEMS, INC.            Topic: AF171022

    An existing 128x128 pixel CMOS image sensor design will be revised and fabricated in a thicker format more suitable for backthinning with the goal of increasing the quantum efficiency from 59% to > 80% at 589 nm. Increasing the epitaxial layer material from 5.2 microns to 14.2 microns is estimated to increase the absorption of 589 nm photons by 48%. A batch of 20 devices will be fully backthinned ...

    SBIR Phase II 2019 Department of DefenseAir Force
  8. Biodegradable Vector Control System

    SBC: MEDENVVET LABORATORIES INC.            Topic: A18144

    MEVLABS will develop a novel vector control device, composed of non-toxic biodegradeable material that can be formed into various containers. The device will be designed to slowly release attractants and toxicants and will be effective on both adult and larvae mosquitoes.The device will be air-deployable or can be hung by hand and will be camouflaged to match the operational environment and incorp ...

    SBIR Phase I 2019 Department of DefenseArmy
  9. Engineered Betavoltaic Materials for Compact, Energy Dense, Battery Technologies

    SBC: Innovative Advanced Materials, Inc.            Topic: N191041

    Innovative Advanced Materials (IAM), Inc., founded by Dr. W. Alan Doolittle, proposes to demonstrate new betavoltaic fuel source innovations and to utilize recent materials advances (last two years) that facilitate a new geometry betavoltaic energy convertor that circumvents many of the previous power limiting bottlenecks. The proprietary IAM TJ LEG architecture will allow for: a) efficient use of ...

    SBIR Phase I 2019 Department of DefenseNavy
  10. SBIR Phase I: Thermal Intensification for Continuous Thermoplastic Composite Forming

    SBC: Weav3d Inc.            Topic: MI

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase I project relates to the historic challenges associated with composite manufacturing, including long cycle times, poor recyclability, labor-intensive manufacturing, and energy-intensive curing processes. Thermoplastic composites have the potential to reduce cycle time, reduce labor requirements, and imp ...

    SBIR Phase I 2019 National Science Foundation
US Flag An Official Website of the United States Government