You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hydrothermal Catalysis Flow Process to Convert Brown Grease into Green Gasoline, Green Jet and Green Diesel Fuels

    SBC: SARTEC CORPORATION            Topic: 08a

    The primary challenges for creating renewable fuels are the ability to process inexpensive non-food feedstocks into biofuels that meet all quality specification, perform indistinguishably from petroleum-based fuels and are compatible with current infrastructure.Our Phase I project demonstrated the feasibility of producing biofuels from waste greases using a novel hydrothermal, continuous-flow cata ...

    SBIR Phase II 2019 Department of Energy
  2. Engineering Analysis and Design of CO2 Geothermal Power System to Provide Dispatable Geothermal Electricity Generation and Grid-Scale Energy Storage

    SBC: TERRACOH INC            Topic: 11b

    In topic 11.b, Dispatchable Geothermal Operations, DOE seeks to enable more widespread deployment of geothermal as a dispatchable energy source.TerraCOH’s CO2 Plume Geothermal (CPG™) and Earth Battery™ technologies are ideally suited to meet DOE’s needs.Conventional geothermal power technology has generally been limited to use as a baseload power source, but with increasing penetration of ...

    SBIR Phase II 2019 Department of Energy
  3. Quantitative In-Situ TEM Nanoindentation Instrument

    SBC: HYSITRON, INCORPORATED            Topic: 30b

    75333S Nanoindentation is the primary technique for assessing the nanomechanical behavior of small volumes of materials. With this technique, the force required to produce a given displacement into a sample by a sharp diamond tip is measured, and the hardness of the material being tested is determined analyzing the force-displacement curve. However, the microstructural origins of the measured me ...

    SBIR Phase II 2005 Department of Energy
  4. Highly Polarized Photocathodes Via Minimization of Spin Relaxation

    SBC: SVT ASSOCIATES INC            Topic: 36c

    79431S Negative-electron-affinity (NEA) photocathodes, which produce polarized electrons, are a vital component of electron accelerators. The Next Linear Collider (NLC) will require a polarized electron beam intensity at least 20 times greater than that which can be produced with strained GaAs, which is used in the current generation of photocathodes. In addition, the degree of electron polariz ...

    SBIR Phase I 2005 Department of Energy
  5. An Improved Material and Low-Cost Fabrication Options for Candle Filters

    SBC: Fluidyne Engineering Corp.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Energy
  6. THE DEVELOPMENT OF HIGH ELECTRICAL GRADIENT, DC ACCELERATOR TUBES WITH ELECTRICAL BREAK- DOWN PROTECTION

    SBC: Sysmed Inc.            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of Energy
US Flag An Official Website of the United States Government