List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Nanofiber-based Paint Overspray air filters for hexavalent chromium

    SBC: eSpin Technologies, Inc.            Topic: AF182005

    This SBIR Phase I proposal will design and develop high performance, energy efficient ion-exchange nanofiber-based paint overspray pocket air filter to capture hexavalent chromate particulate matter and paint shop dust created during sanding, grinding, and aircraft prep operation present in air. ion exchanging polymer will be electrospun to produce high surface area nanofiber and combined with lay ...

    SBIR Phase I 2019 Department of DefenseAir Force
  2. Field of Light Display for Air, Space, and Cyber Battle Management

    SBC: THIRD DIMENSION TECHNOLOGIES            Topic: AF182007

    Third Dimension Technologies will perform design of a 45-deg x 45-deg full parallax Field of Light Display (FoLD) system in Phase I, and will also during Phase I build a simple 3 x 3array proof of concept FoLD system. A FoLD display provides full parallax 3D viewing without glasses or headgear, just as if the viewer was looking through a window. The Phase I design will include an assessment of spa ...

    SBIR Phase I 2019 Department of DefenseAir Force
  3. Pressure Gain Combustor

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: AF182064

    Pressure-gain combustion systems such as an RDE allow for increased thermodynamic efficiency. In a gas-generator or staged combustion system, an RDE would allow for reduced pump size, and an increase in efficiency. For the past decade GTL has been developing novel propulsion modeling methods and hardware. In this effort, the application of an RDE along with a novel complimentary alternative will b ...

    SBIR Phase I 2019 Department of DefenseAir Force
  4. Physical-Cyber Vulnerability Identification

    SBC: METAMORPH INC            Topic: AF183003

    Differentiating from conventional cybersecurity approaches, the Physical-Cyber System penetration test, PCS-PenTest, evaluates physical side-channel attacks where RF energy is injected into the system and received on unintended antennas, transduced by accidental RF receivers, and causes abnormal system operation and/or state changes.Finding these vulnerabilities is challenging.Given that the poten ...

    SBIR Phase I 2019 Department of DefenseAir Force
  5. Robotic, Autonomous, Deployable (RAD) Factories and 3D-Printed Construction

    SBC: BRANCH TECHNOLOGY, INC.            Topic: AF191005

    Branch Technology has developed a revolutionary method of large-scale Freeform 3D-Printing for construction called Cellular Fabrication (C-FAB) that brings unprecedented design freedom, resource stewardship, and manufacturing efficiency to the construction arena. By combining prefabrication and additive manufacturing, C-FAB will enable cost and time savings for Air Force end-users while also allow ...

    SBIR Phase I 2019 Department of DefenseAir Force
  6. Condition-Based Health Monitoring Utilizing Tip Timing Data

    SBC: Non-Contact Technologies, LLC            Topic: AF191005

    The United States Air Force at Arnold Engineering Development Complex (AEDC) has identified a need for long-term health monitoring software utilizing blade tip timing. This software will provide multiple benefits, including the potential to minimize $500,000 in time-based maintenance costs experienced by the Engine Test Facility at AEDC, improve maintenance and analyst personnel productivity, and ...

    SBIR Phase I 2019 Department of DefenseAir Force
  7. Automated Test Data Analysis for Turbine Engine Testing

    SBC: EXPERIMENTAL DESIGN & ANALYSIS SOLUTIONS, INC.            Topic: AF191005

    Engine testing requires extensive time for manual data reduction and analysis, adding several months to the end of the test, increasing test costs and impacting the overall development schedule.Commercial industry has adopted automated data reduction and analysis techniques, which has led to reduced engine development cycle times, improved test efficiency, and reduced development costs.Adopting co ...

    SBIR Phase I 2019 Department of DefenseAir Force
  8. Direct Blood Volume Analyzer for Improvement of Combat Casualty Care

    SBC: Daxor Corporation            Topic: A18122

    Daxor proposes an automated, ruggedized, portable system for calculating blood, red cell, and plasma volumes, based on a comprehensive adaptation and reengineering of the current gold standard for volume measurement, the Daxor BVA-100.Significant improvements in portability (size, weight, and battery operation), logistics, speed, and ease of use are achieved. Whole blood is sampled directly from t ...

    SBIR Phase I 2019 Department of DefenseArmy
  9. Portable Ruggedized Energy Efficient Medical Sterilizer (PREEMS)

    SBC: Fort Defiance Industries, LLC            Topic: N182096

    Sterilization requirements in far-forward Roles 1 & 2 are challenging and not easily satisfied with currently available commercial devices. Steam-sterilant systems are hindered by excessive cube/weight, large power requirements, high water consumption and fragile unreliable designs. Non-steam options such as ozone and ethylene oxide have harmful residues, undesirable off-gassing, long cycle times, ...

    SBIR Phase I 2019 Department of DefenseNavy
  10. Development of Explosive Feedstock for Commercial-off-the-Shelf (COTS) 3D Printers

    SBC: E&G Associates, Inc.            Topic: N171060

    Traditional manufacturing methods for producing warheads, propellants, and pyrotechnic systems are timely and costly. Additive manufacturing (AM) approaches offer one path of alternative manufacturing technologies. Among various technologies, powder bed fusion (PBF) is one promising approach. Hewlett Packards Multi-Jet Fusion printers utilize a unique PBF process that presents a desirable solution ...

    SBIR Phase II 2019 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government