List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. SBIR Phase I: Development of a Multimodal Interface for improving independence of Blind and Visually-Impaired people

    SBC: UNAR Labs, LLC            Topic: EW

    The broader impact/commercial potential of this project will be to promote empowerment of millions of blind and visually-impaired (BVI) people by enabling greater independence, supporting increased educational attainment, proliferation of vocational opportunities, and enhancing their overall quality of life. There are currently no commercial solutions for providing BVI users with an assistive tech ...

    SBIR Phase I 2019 National Science Foundation
  2. Enhanced Precision in Geothermal Reservoir Characterization and Exploitation

    SBC: Introspective Systems, LLC            Topic: 21a

    A seminal report by MIT estimated that Enhanced Geothermal Systems (EGS) could provide 100 GW of cost competitive base-load capacity by 2050. Successful integration of this renewable power source and the offsetting of fossil fuels (mainly coal) could reduce 401 million metric tons of carbon dioxide and decrease the US total CO2 emissions by 6.1%. The development of this geothermal resources presen ...

    SBIR Phase I 2019 Department of Energy
  3. Remote Monitoring of Sensors during Composite Curing

    SBC: ENVIRONETIX TECHNOLOGIES CORPORATION            Topic: AF182091

    In this project, Environetix Technologies Corporation will demonstrate the feasibility of using an array of wireless, passive, Surface Acoustic Wave (SAW) temperature sensors and an accompanying radio-frequency (RF) interrogator system to accurately and reliably monitor cure/bond temperatures during processing of composite structures at distances > 6 inches, within constraints dictated by vacuum b ...

    SBIR Phase I 2019 Department of DefenseAir Force
  4. Using A Novel Concentration Technology to Develop Products for Army Rations

    SBC: ELDERTIDE LLC            Topic: A17069

    Warfighters are routinely required to carry out missions demanding peak physical fitness, endurance, and sustained mental acuity. Phase I proved the technical feasibility of developing an antioxidant rich blended juice concentrate at a bench top level utilizing a novel concentration technology. Phase II will utilize this technology and superior juice blend concentrate to develop operational ration ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. AN ACOUSTIC PLATE MODE DNA BIOSENSOR

    SBC: BIODE, INC.            Topic: N/A

    THIS PROJECT IS DEVELOPING A NEW SOLID-STATE BIOSENSOR TECHNOLOGY FOR BIOLOGICAL MEASUREMENTS. THIS TECHNOLOGY IS BASED ON THE MERGING OF TWO RELATIVELY DIFFERENT TECHNOLOGIES: NUCLEIC ACID PROBES (DNA HYBRIDIZATION TECHNOLOGY) WITH ACOUSTIC PLATE MODE (APM) MICROSENSORS. RECENT ADVANCES IN THE DESIGN AND OPERATION OF APM DEVICES HAVE DEMONSTRATED A DNA HYBRIDIZATION SENSOR PRINCIPLE WITH EXCELLEN ...

    SBIR Phase I 1992 Department of Energy
  6. High-Strength Piezoceramic Fibers for Smart Adaptive Structures

    SBC: Fiber Materials, Inc.            Topic: N/A

    This program on high-strength piezocermaic fibers probes a critical gap in the technology of smart materials which interconvert electrical and mechanical energy. Strong piezoceramic fibers that can function as load bearing members in structures and survive the large mechanical strains encountered in highly stressed engineering components are not developed. It is envisioned that piezoelectric fabri ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  7. Truss Member Fabrication Using In-Situ Thermoplastic Materials

    SBC: Fiber Materials, Inc.            Topic: N/A

    To continue the development of low cost carbon composite material, this program is intended to demonstrate the ability to fabricate net shape tubular space truss components using co-braided carbon and thermoplastic (PEEK) yarns. The thermoplastic yarn, when processed through an autoclave cure using high pressure and temperature, will fuse the high modulus carbon fibers together to form a rigid fin ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  8. 2400K GAS SAMPLE CELL

    SBC: Fiber Materials, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseAir Force
  9. DEVELOPMENT OF SMART MATERIAL STRUCTURES WITH PIEZOELECTRIC COMPOSITES

    SBC: Fiber Materials, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  10. EMBEDDED PAVEMENT STRESS SENSORS CONTAINING PIEZOELECTRIC COMPOSITES

    SBC: Fiber Materials, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government