List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  2. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  3. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  4. V-LAB: A Virtual Laboratory for Structural Integrity Assissment of Composite Components

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Investigation of failed composite components requires tress analysis to assess their structural integrity. Currently there exist no general-purpose software packages for composite structural analysis that are accessible to failure investigators who are not experts in these types of analysis. The proposed research and development effort will fill this void with a flexible user friendly, PC-based ...

    SBIR Phase II 1996 Department of DefenseAir Force
  5. Methodology to Predict Ballistic Penetration and Damage of Composite Laminated Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Current utilization of composite materials in air and surface weapons systems and structures is extensive, and the use of these materials can be expected to increase in the future. Weapons effectiveness assessments and the design of protective structures require methodologies to predict the terminal ballistic interactions between projectiles and fragments penetrating composite laminated target st ...

    SBIR Phase I 1996 Department of DefenseNavy
  6. Non-Eroding Fin Materials

    SBC: Applied Research Associates, Inc.            Topic: N/A

    This project will analyze and select promising materials and designs to be used in the plumes of tactical solid rocket motors for missile steering and control. The emphasis is on high-performance refractory materials and compatibility of material systems. The control fins experience severe thermal and severe particulate erosion environments. Missile controllability requires fins with minimal er ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. ProFEA: A General Purpose Graphically-Based Probabilistic Finite Element Analysis System

    SBC: Applied Research Associates, Inc.            Topic: N/A

    This Phase I SBIR will develop a general purpose probabilistic finite element analysis system, ProFEA, that allows designers to perform probabilistic finite element analysis in a graphical environment that is completely familiar and similar to modern deterministic FEA. We have developed an innovative architecture that takes advantage of emerging file exchange and database standards (I ...

    SBIR Phase I 1996 Department of DefenseAir Force
  8. Interface-Driven Multidisciplinary Design of Large-Scale Aircraft Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  9. In-Situ Formation of a Particle Barrier to Halt DNAPL Transport

    SBC: Barrier Technology            Topic: N/A

    This project will develop a method for forming and emplacing a horizontal barrier within a groundwater aquifer to prevent downward migration and further contamination of groundwaters by Non-Aqueous Phase Liquids (NAPLs). Certain properties of the immiscible liquid system act to form the barrier from injected particulate or colloidal materials and to stabilize the barrier once it is form ...

    SBIR Phase I 1996 Department of DefenseAir Force
  10. Numerical Simulation of Dynamic Stall

    SBC: Ecodynamics Research Associate            Topic: N/A

    The objective of the proposed program is to develop, demonstrate and validate a three-dimensional, time-dependent, compressible Navier-Stokes program for predicting dynamic stall. The foundation of the program is an existing 3-D program that has been developed under prior SBIR funding for retreating-blade dynamic stall on modern high-performance helicopter rotors. The program will be improved in ...

    SBIR Phase I 1996 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government