Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Design, Manufacture, and Test of an Underwater Acoustic Intensity Probe

    SBC: Acoustech Corporation            Topic: N/A

    The Acoustech Corporation as the prime contractor and the Pennsylvania State University - Applied Research Labc-atory as the subcontractor propose to design, manufacture, and test an underwater acoustic intensity probe containing a geophone and two-hydrophones encased in a neutrally buoyant package. The results of this proposed effort are anticipated to be highly successful since the researc ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. High Throughput Multiple Access Digital Wireless Communications

    SBC: AIMS, INC.            Topic: N/A

    We propose a radically innovative approach to the problem of multiple access communication which promises to revolutionize the modern communication industry by dramatically increasing network throughput. Our approach is based upon two major novel components: (i) hybrid time-frequency allication of communication channel resources, and(ii) non-orthogonal, i.e., overlaping, multiplexed signals. Toge ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Development of a Commercial Multiple Degree of Freedom Measurement System

    SBC: American Research Corporation of Virginia            Topic: N/A

    The Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Advanced Six-Degree-of-Freedom (6-D) Laser Measurement System

    SBC: AUTOMATED PRECISION INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  6. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Predictive Filtering of Situation Awareness Position Information

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: N/A

    The proposed research project is directed at the problem of reducing communications requirements for Situation Awareness Target location by using an optimal Kalman filter to predict target motion, and only communicating data when the target position differs sufficiently from the position predicted by the filter. Our Phase I approach is to quantify the bandwidth limitations of the communications s ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Cost effective, rapid densification of lightweight ceramic matrix composite LRE components by gas phase reaction synthesis

    SBC: EXOTHERMICS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. Low-Cost Cascade J-T Cryocooler with an Oil-Free Compressor

    SBC: CREARE LLC            Topic: N/A

    We propose to develop an inexpensive, high performance closed-cycle cascade J-T cryocooler. The cryocooler will be based on a high pressure ratio, oil-free, metal diaphragm compressor. This innovative compressor will be compact, inexpensive and extremely reliable. The compressor can either be used with single-stage mixed-gas or multi-stage cascade cycles. For a single-stage mixed gas cryocoo ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  10. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government