List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. LOW-COST COMPOSITE MANUFACTURING PROCESS

    SBC: Adherent Technologies, Inc.            Topic: N/A

    THE ADVANTAGES OF THERMOPLASTIC MATRIX COMPOSITES FOR MANUFACTURING LOW-COST CMPONENTS HAVE YET TO BE REALIZED. AN IMPORTANT FACTOR LIMITING THERMOPLASTIC COMPOSITES IS THE LACK OF LOW-COST METHOD FOR PRODUCING HIGH-QUALITY PREPREGS AND PREFORMS. A METHOD OF PRODUCING THESE MATERIALS THAT IS COMPATIBLE WITH COMMONLY USED COMPOSITE FABRICATION TECHNIQUES SUCH AS FILAMENT WINDING, PULTRUSION, AND PR ...

    SBIR Phase II 1996 National Science Foundation
  2. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  3. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  4. Ultrafast Polysilylene Scintillators

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  5. HIGH-TEMPERATURE FINISH FOR AMB-21 MATRIX COMPOSITES

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  6. Arsine Abatement

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The continued use of arsine gas and/or its derivatives is vital to the manufacture of a wide variety of semiconductor devices. While the use of arsine is growing, it poses serious environmental and safety problems in the industry. New methods must be found that permit the facile trapping and detoxification of arsine and its derivatives. Advanced Technology Materials, Inc. (ATM) has gained a reputa ...

    SBIR Phase II 1996 Department of DefenseAir Force
  7. High Performance Thin Film Microactuator Materials

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The potential applications of microelectromechanical systems (MEMS) have only begun to be recognized. This technology demands thin film materials with exceptional microstructural quality for high performance and processes with high yields. For piezoelectric microactuator applications, thin film lead zirconate titanate (PZT) is the leading material choice. Furthermore, substitutional modificatio ...

    SBIR Phase II 1996 Department of DefenseAir Force
  8. Stress Analyzer for Microelectronic Devices

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Multilayer thin films deposited onto Si wafers often exhibit high residual stresses during processing, leading to structural failure and/or electrical breakdown. Traditional scanning x-ray diffraction provides an accurate measurement of complex stress behavior in multilayer structures, but is difficult to carry out on a routine basis. Laser deflection methods are easy to perform but provide a li ...

    SBIR Phase II 1996 Department of DefenseAir Force
  9. COMPACT LOW-NOISE DIAMOND DYNODES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    THE UNIQUE PROPERTIES OF SEMICONDUCTING DIAMOND MAY BE EXPLOITED TO CREATE NOVEL, COMPACT, LOW-NOISE PHOTON AND PARTICLE DETECTORS. PHOTOMULTIPLIER TUBES ARE THE DETECTOR OF CHOICE WHEN LIGHT LEVELS ARE LOW OR WHEN THE PROPER SIGNAL MUST BE EXTRACTED FROM A CLUTTERED BACKGROUND. CONTINUOUS DYNODES, KNOWN AS CHANNEL ELECTRON MULTIPLIERS, ARE WIDELY USED AS PARTICLE DETECTORS. INNOVATIVE CHANGES ...

    SBIR Phase II 1996 National Science Foundation
  10. SiC accelerometers for harsh environments

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Sensors and control electronics based on SiC offer an opportunity to realize systems with operating temperatures approaching 500 degrees C. The unique high temperature properties and chemical robustness of SiC make it an ideal choice for applications where generic components and sensors need to function under widely varying environmental conditions The wide range of environments in which military ...

    SBIR Phase II 1996 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government