List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Particle Sizing and Identification Through Advanced Light Scatter Techniques

    SBC: Ade Corp.            Topic: N/A

    Light scatter has been used to map and size particles on silicon wafers for many years, producing accurate maps of particle position and giving an indication of particle size, but do not reveal any information about particle composition. Today's technology is limited by noise, precluding detection of the smallest particles of interest. Present instruments are not adequate for the next generation ...

    SBIR Phase II 1996 Department of Commerce
  2. High Resolution Semiconductor Gamma Ray Detectors for Radionuclide Metrology

    SBC: Radiation Monitoring Devices, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  3. A High Temperature Fiber Optic Raman Probe for Corrosion and Process Monitoring

    SBC: EIC LABORATORIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  4. A Dynamical Instrument for Machining Centers

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    In the program, we will develop a measurement system based on the dynamics of the machining process. This system will use the variation in the forces or accelerations occurring during machining to characterize the mechanisms occurring between the cutter and workpiece. This will provide real time indications of the finish of the surface that is being created, the proximity to the chatter threshol ...

    SBIR Phase I 1996 Department of Commerce
  5. Attaining Logical Connectivity Through Mediators

    SBC: Gupta Consultancy Inc.            Topic: N/A

    With the objective of ultimately providing tools and technologies for facilitating logical connectivity for manufacturing applications in an NII environment, this proposal involves research in the ares of: agent-based mediators, shared ontologies, conversion libraries, scalability, and automated reading of information from paper and other traditional media.

    SBIR Phase I 1996 Department of Commerce
  6. A Virtual Machining and Inspection System (VMIS)

    SBC: Icamp, Inc.            Topic: N/A

    The purpose of the VMIS is to allow manufacturers the luxury of testing and perfecting manufacturing plans long before a single machine tool is turned on and resources are committed. The VMIS will allow the user to select an available machine tool and an available inspection device, specify a proposed inspection plan and a dimensional analysis procedure, and then build and inspect hundreds (or ev ...

    SBIR Phase II 1996 Department of Commerce
  7. Compact Stationary Spectrometer for Wide Spectral Range Applications

    SBC: Optra, Inc.            Topic: N/A

    The development of a Fourier transform spectrometer with a minimum number of moving parts (or more ideally no moving parts - the so-called stationary spectrometer) has been the subject of considerable research and development. Recent work on a birefringence based system has resulted in the introduction of a commercial version of the system. While a significant step toward the goal of a practical ...

    SBIR Phase I 1996 Department of Commerce
  8. High Accuracy Rotation Stage for X-Ray Diffractometry

    SBC: Optra, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  9. A mobile Boundary Layer Radar Wind Profiler for Remote Measurements of Vertical Wind Shear

    SBC: PROSENSING, INC.            Topic: N/A

    This project will develop a mobile boundary layer radar wind profiler intended for rapid deployment in regions of severe storm activity. The goal of this research will be investigate the feasibility of developing a low cost, low maintenance, mobile instrument capable of profiling vertical and horizontal wind velocities in the lowest 3 km of the atmosphere. The system's mobility and quick setup t ...

    SBIR Phase I 1996 Department of Commerce
  10. High Resolution Surface Current Mapping Radar System for Intercoastal Waterways

    SBC: PROSENSING, INC.            Topic: N/A

    Quadrant Engineering has recently developed a wide bandwidth microwave radar system, named CDKS, capable of processing radar signals using the Delta K technique. Design goals were to develop a ruggedized, compact, and low-cost instrument for operational use as part of NOAA's harbor monitoring system. In this project, the first field experiments are to be carried out using the CDKS system. These ...

    SBIR Phase I 1996 Department of Commerce

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government