List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 3228 results
  1. Particle Sizing and Identification Through Advanced Light Scatter Techniques

    SBC: Ade Corp.            Topic: N/A

    Light scatter has been used to map and size particles on silicon wafers for many years, producing accurate maps of particle position and giving an indication of particle size, but do not reveal any information about particle composition. Today's technology is limited by noise, precluding detection of the smallest particles of interest. Present instruments are not adequate for the next generation ...

    SBIR Phase II 1996 Department of Commerce
  2. Diagnostic Development for Characterizing Fuel Droplet Temperatures in Spray Flames

    SBC: Aerometrics Inc.            Topic: N/A

    Development of efficient spray combustors requires a complete understanding of fundamental phenomena that influence and control the overall spray combustion process. Toward this end, detailed experimental characterization of spray flames is essential. This includes measurement of various fuel droplet parameters such as droplet size, velocity, number density, temperature, composition, and droplet ...

    SBIR Phase II 1996 Department of Commerce
  3. High Resolution Semiconductor Gamma Ray Detectors for Radionuclide Metrology

    SBC: Radiation Monitoring Devices, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  4. Scanning Head Storage Phosphor Plate Scanner

    SBC: APREND TECHNOLOGY            Topic: N/A

    The specific problem addressed by the proposed research is the development of a scanner for storage phosphor plates with significantly better positional and intensity accuracy than the current state of the art. The new scanner will be based on the use of a "scanning head" scanning approach which is more simple, accurate, and stable than the approaches previously used. This results in stable and ...

    SBIR Phase II 1996 Department of Commerce
  5. Extending the Dynamic Flowgraph Methodology (DFM) to Model Human Performance and Team Effects

    SBC: ASCA, INC.            Topic: N/A

    N/A

    SBIR Phase II 1996 Nuclear Regulatory Commission
  6. Mathematical Models for DNA Sequencing Quality Assurance

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: N/A

    The growing use of DNA sequence data in research, databases, dianostic and therapeutic biotechnology; and even litigation requires that the quality of data being used be objectively assessable. The proposed research addresses the following problems associated with sequence data: the inability to associate consistent, quantitative error rate estimates with sequence data; the concomitant lack of q ...

    SBIR Phase II 1996 Department of Commerce
  7. Thermal Microprobe

    SBC: Digital Instruments, Inc.            Topic: N/A

    This project will complete the design and fabrication of a novel high-resolution termal microprobe, and evaluate its potential for measuring the temperature of operating microelectronic components with a temperature resolution of 0.01 C and a spatial resolution of 10 nm. Fabrication is in two major steps: formation of a prototype AFM microprobe, and the addition of a thermocouple junction to the ...

    SBIR Phase I 1996 Department of Commerce
  8. A High Temperature Fiber Optic Raman Probe for Corrosion and Process Monitoring

    SBC: EIC LABORATORIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  9. A Dynamical Instrument for Machining Centers

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    In the program, we will develop a measurement system based on the dynamics of the machining process. This system will use the variation in the forces or accelerations occurring during machining to characterize the mechanisms occurring between the cutter and workpiece. This will provide real time indications of the finish of the surface that is being created, the proximity to the chatter threshol ...

    SBIR Phase I 1996 Department of Commerce
  10. Attaining Logical Connectivity Through Mediators

    SBC: Gupta Consultancy Inc.            Topic: N/A

    With the objective of ultimately providing tools and technologies for facilitating logical connectivity for manufacturing applications in an NII environment, this proposal involves research in the ares of: agent-based mediators, shared ontologies, conversion libraries, scalability, and automated reading of information from paper and other traditional media.

    SBIR Phase I 1996 Department of Commerce

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government