List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Design, Manufacture, and Test of an Underwater Acoustic Intensity Probe

    SBC: Acoustech Corporation            Topic: N/A

    The Acoustech Corporation as the prime contractor and the Pennsylvania State University - Applied Research Labc-atory as the subcontractor propose to design, manufacture, and test an underwater acoustic intensity probe containing a geophone and two-hydrophones encased in a neutrally buoyant package. The results of this proposed effort are anticipated to be highly successful since the researc ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. LOW-COST COMPOSITE MANUFACTURING PROCESS

    SBC: Adherent Technologies, Inc.            Topic: N/A

    THE ADVANTAGES OF THERMOPLASTIC MATRIX COMPOSITES FOR MANUFACTURING LOW-COST CMPONENTS HAVE YET TO BE REALIZED. AN IMPORTANT FACTOR LIMITING THERMOPLASTIC COMPOSITES IS THE LACK OF LOW-COST METHOD FOR PRODUCING HIGH-QUALITY PREPREGS AND PREFORMS. A METHOD OF PRODUCING THESE MATERIALS THAT IS COMPATIBLE WITH COMMONLY USED COMPOSITE FABRICATION TECHNIQUES SUCH AS FILAMENT WINDING, PULTRUSION, AND PR ...

    SBIR Phase II 1996 National Science Foundation
  3. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  4. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  5. Ultrafast Polysilylene Scintillators

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  6. HIGH-TEMPERATURE FINISH FOR AMB-21 MATRIX COMPOSITES

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  7. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  8. SOFTWARE AID FOR DIAGNOSIS OF WRIST JOINT PATHOLOGY

    SBC: Amniotech, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services
  9. High Power Target Design for a Next Generation Radioactive Beam ISOL-Type Facility

    SBC: Amparo Corp.on            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  10. Three-Dimensional Electromagnetic Modeling and Simulation of MMICs and Interconnects in Microwave Packages

    SBC: ANSOFT CORP.            Topic: N/A

    A methodology is proposed for introducing the capability of modeling active MMICs into the industry-standard three dimensional electromagnetic field simulator High Frequency Structure Simulator (HFSS) and Maxwell SI Eminence. The first objective of the proposed work is to evaluate the existing capabilities of HFSS/Eminence for characterizing the passive three dimensional interconnect problems as ...

    SBIR Phase II 1996 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government