You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Aerospace Ceramics and Bone

    SBC: BIOMEDICAL ENTERPRISES INC            Topic: N/A

    BioMedical Enterprises, Inc. (BME) and NASA Ames Research Center (NASA ARC) are developing NASA's aerospace insulation materials for use as an osseous scaffolding to facilitate and support bone wound healing and regeneration. Fibrous reusable composite insulation (FRCI) developed by NASA for use on the space shuttle was modified to promote bone ingrowth and will be evaluated for its ability to fo ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  2. A Low-Cost Miniature Active Radar Frequency Package (AFRP)

    SBC: Carrell Associates, Inc.            Topic: N/A

    This SBIR Phase I program will test the feasibility of achieving a high effective radar cross section over extremely wide bandwidth in a small, low-cost, RF repeater module, using a retrodirective array of a very small repeaters. The array factors effectively multiply the RF characteristics of a single channel to realize high array gain and power using low-performance amplifier. An integral goal ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  3. Data Compression Techniques for Portable Computing Environments

    SBC: Fastman, Inc.            Topic: N/A

    The capability to transmit digitized reports to rear echelon forces during an ongoing battle is a critical command and control component. However, projections of the amount of digital traffic over transmissions links raise the distinct possibility that the demand for digital information tranmitted across the battlefield will outstrip channel capacity. Being able to reduce the quantity of traffic ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Active Mode Millimeter Wave Imaging

    SBC: K&c Tech., Inc.            Topic: N/A

    This proposal addresses an approach to millimeter wave imaging called encoded image detection (EID). The concept offers a means of achieving a low cost, all weather seeker for smart munition and submunitions. Its low cost potential makes adaptation of the imager also attractive for a variety of other military applications such as search and rescue, surveillance, and security. Most current devel ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  5. Ultraspectral Imager

    SBC: KESTREL CORP            Topic: N/A

    This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  6. Model Neutral Data Representation Using the Theory of Corobs

    SBC: LAWRENCE TECHNOLOGIES, LLC            Topic: N/A

    We propose to demonstrate a powerful, general approach, the Theory of Corobs, to address DARPA's identified need for canonical data structure and access mechanisms to support model interoperability. The technology we will produce under this contract will enable the construction of robust data warehousing supporting a wide range of "looks" of the data to the outside world, true generic knowledge b ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  7. Virtual Environmental Training for Battlefield Medical Personnel

    SBC: LINCOM CORP.            Topic: N/A

    The Virtual Environment Training for Battlefield Medical Personnel (VETBMP) project is the development of a simulation architecture designed to integrate procedural simulations, intelligent tutoring, and various sensory input devices to create a realistic training scenario for 'forward' military personnel. Phase I of VETBMP will be a simulation of a standard medic task (intravenous infusion), emb ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  8. Electrochemical Recovery of Heavy Metals from Ground Water at Military Sites

    SBC: LYNNTECH INC.            Topic: N/A

    The Department of Defense has undertaken an ambitious environmental restoration program at thousands of facilities in the U.S. Many of these facilities have been contaminated by the discharge of dissolved heavy metals. Often these contaminants migrate into the ground water where they pose a serious threat to aquatic systems and to human health. The remediation of soils and ground water is usual ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  9. System Engineer Toolset for Fault Tolerant Design

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    This SBIR will explore and develop new automated methods for dynamic fault tolerance in defense electronic systems. The research will investigate using the software of digital signal processor operating systems to pro-actively map defective operations to remaining processors. In the past, fault tolerance has relied on passive redundancy to extend operating life. With software, a simple re-start ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Low Cost Manufacture of Micro-Optical Components & Systems Using Ink-Jet Technology

    SBC: MicroFab Technologies Inc            Topic: N/A

    We will develop a new low cost, data driven, manufacturing technique for constructing micro-optical elements and optical integrated circuits. Specifically, we will apply ink-jet printing technology to form and place microscopic droplets of passive and active optical materials, such as uv-cured resins and sol-gel glasses, in order to construct micro-optical elements and structures of high scientifi ...

    SBIR Phase II 1996 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government