List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Laser Polarimetric Apparatus for Rapid Emissivity Measurements on Pulse-Heated Materials

    SBC: Containerless Research, Inc.            Topic: N/A

    Laser polarimetric/ellipsometric methods have been employed in our laboratory for the measurement of the normal spectral emissivities of solid and liquid materials at elevated temperatures. In this approach, a polarized light source is incident on the surface of interest at oblique incidence, and the reflected polarization state is measured in about 0.5 ms. The optical properties of the surface, ...

    SBIR Phase II 1996 Department of Commerce
  2. A Virtual Machining and Inspection System (VMIS)

    SBC: Icamp, Inc.            Topic: N/A

    The purpose of the VMIS is to allow manufacturers the luxury of testing and perfecting manufacturing plans long before a single machine tool is turned on and resources are committed. The VMIS will allow the user to select an available machine tool and an available inspection device, specify a proposed inspection plan and a dimensional analysis procedure, and then build and inspect hundreds (or ev ...

    SBIR Phase II 1996 Department of Commerce
  3. An Expert System for Aquaculture Environment Control

    SBC: Ortech Engineering Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project will explore the use of a fuzzy logic based expert system in a closed loop control system for nitrate removal (denitrification) from large aquaculture systems. Nitrate is naturally generated by the bio-mass in any aquatic system. Current techniques for the control of nitrate levels are almost exclusively based on water exchange. For large ...

    SBIR Phase II 1996 Department of Commerce
  4. A Diode Laser Multigas Analyzer for Advanced Detection of Fires

    SBC: Southwest Sciences, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  5. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  6. Field Energy Recoil Emission Technology (FERET)

    SBC: INVOCON, INC.            Topic: N/A

    Passenger safety concerns have prompted the FAA to elicit energy-sensitive neutron detectors which do not rely on the time-of-flight method and are suitable for use in explosive detection systems. Invocon, Inc. proposes to design an inspection system consisting of an energy source and a detector. Designated FERET sytem, (Field Energy Recoid Emission Technology), it would detect substances identi ...

    SBIR Phase I 1996 Department of Transportation
  7. Electronic Pasteurization of Meat Patties

    SBC: Accelerator Technology Corporation            Topic: N/A

    Accelerator Technology Corp. proposes to develop a compact, cost-effective elctron-beam disinfestation system for pasteurization of meat patties. The system is designed to be integrated into the production line of a conventional meat patty operation. In such operations, the patties are stamped from sheets of ground meat in rows of 4-5 patties, moving on a conveyor at the rate of ~1 row/second. ...

    SBIR Phase I 1996 Department of Agriculture
  8. Development of a Quantitative Assay for Rodent Excreta

    SBC: Biotect, Inc.            Topic: N/A

    Rodent pancreatic trypsin will be isolated from rodent pancreatic tissue. The enzyme will be purified and injected into rabbits to generate polyclonal antibodies. The rabbit anti-rodent trypsin antibodies will be used to develop a sandwich ELISA assay for rodent fecal contamination in agricultural and food products.

    SBIR Phase II 1996 Department of Agriculture
  9. Foam in Place Mulching Method for Specialty Crops

    SBC: C And A Country Gardens            Topic: N/A

    Frothed foams will be prepared and applied in place as low cost mulches for weed control in small plot specialty crop operations. Foam mixes will be formulated from degradable natural polymers including gelatins and starches. Fillers will be common cellulosic mulch ingredients such as crushed seed hulls and corncobs. A conventional portable spray tank modified with an impeller blade will mechan ...

    SBIR Phase I 1996 Department of Agriculture
  10. HIGH-SPEED DRYING OF SPACEBOARD II

    SBC: GENESIS LABORATORIES, INC            Topic: N/A

    AN APPARATUS AND TECHNIQUE FOR HIGH-SPEED DRYING OF A NEW STRUCTURAL MATERIAL, KNOWN AS SPACEBOARD, WILL BE DEVELOPED. SPACEBOARD IS A NOVEL STRUCTURAL BOARD COMPOSED OF PULPED WOOD FIBER. THE SPACEBOARD CONCEPT WAS INVENTED AT THE FOREST PRODUCTS LABORATORY SEVERAL YEARS AGO. THE BOARDS ARE PRODUCED BY PRESSING FIBER AGAINST COMPRESSIBLE RUBBER MOLDS TO FORM A STRUCTURE HAVING A SMOOTH FACE, BACK ...

    SBIR Phase II 1996 Department of Agriculture

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government