Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Ultra-Textured Active polymer (UTAP) Composite for High-Performance Intelligent Acoustic Transducers

    SBC: Ceramare Corporation            Topic: N/A

    This Small Business Innovative Research Phase I project seeks to combine the enhanced piezoelectric properties of single crystal perovskite ferroelectrics, recently discovered at Pennsylvania State University, with the electrostrictive properties of polyurethane to make a new class of "smart" materials for acoustic transducers. A tape casting process is used to form composite sheets compromising ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Optical Patternation of Sprays

    SBC: PRINCETON SCIENTIFIC INSTRUMENTS, INC.            Topic: N/A

    The proposal is to develop a high frame rate imaging system for combustion and other research, by combining a solid state camera capable of capturing images of transient photometric phenomena at framing rates up to 1,000,000 frames per second with the laser sheet illumination technology that has been developed by the Propulsion Directorate of Phillips Laboratory. Both instrumental technologies ar ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  3. Extended Mission Low Power Concepts for Portable Computing Environment (T-103-96)

    SBC: TERI RESEARCH, INC.            Topic: N/A

    The proposed research will focus on leveraging significant technology breakthroughs in reduced power electronic components and computer power saving devices necessary to achieve the desired operating times and mission endurance for Soldier Command and Control (C2) System products. Researching and maturing selected key low power technologies is proposed to enhance the effectiveness of these systems ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  4. Breathable Release Coatings for Ceramic Tooling

    SBC: UTILITY DEVELOPMENT CORP            Topic: N/A

    The main objective of this Phase I program will be to develop a release coating for use with ceramic tooling that will be capable of withstanding cure temperatures in excess of 700F and will have high solvent vapor permeability. The main approach will be to formulate a high temperature film forming silicone resin system by investigating improvements of silicone resins that will be modified with p ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: T P L, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Adaptive Data Compression for Efficient File Transport Over Wireless Networks

    SBC: Artery Communication            Topic: N/A

    Because of the scarce network bandwidth available on the wireless links, data compression plays a critical role in the wireless system design. We propose to evaluate existing public-domain and commercial lossless data compression packages in the context of wireless networking. The specific criteria used include compression efficiency, compression speed, memory usage, and ease of being incorporat ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. An Advanced Aerodynamic Module for Flight Simulation Including Unsteady Aerodynamics and Wake Distortion Effects

    SBC: Continuum Dynamics Inc            Topic: N/A

    An improved computer module for representing rotor flow field effects on flight dynamics response is proposed for development. This model extends finite-state dynamic inflow models to address current limitations in predicting rotorcraft off-axis response to control inputs. The software module also includes features for representing rotor operation in the vortex ring state. The model is novel ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Optical Patternation of Sprays

    SBC: PRINCETON SCIENTIFIC INSTRUMENTS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. Extended Mission Low Power Concepts for Portable Computing Environment (T-103-96)

    SBC: TERI RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government