List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Inorganic Confromal Coatings for SIC Packaging

    SBC: TPL, INC.            Topic: N/A

    Glass is an attractive material for microelectronic packaging because it is hermetically sealing, has a low coefficient of thermal expansion, and is compatible with d.c. circuits. Unfortunately, the working temperature of glass is too high for this application. Low-temperature processing of a sol-gel derived, aluminosilicate material for hermetic seals is proposed for electronic packaging. This ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  4. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Development of Safe, Effective Difluoramination Reagents

    SBC: TPL, INC.            Topic: N/A

    Rocket motors that develop greater thrust with lower weight and volume require-ments are an ever present goal of the BMDO. One method of providing this is through formulation of higher energy propellant mixtures. TPL proposes to develop a new method of effectively producing new high perfor-mance propellant constituents for launch, orbit-orbit transfer and station keeping propulsion systems. The p ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Solid-State Spray Forming of Near-Net-Shape Structural Materials

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: N/A

    The objective of this research is to demonstrate the feasibility of spray forming aluminum Metal Matrix Composites (MMC) in the solid-state physical form as a light weight structural material. It is anticipated that this innovative manufacturing process will provide opportunities to fabricate near-net-shape spacecraft and interceptor structures with unique material properties. The process called S ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Ultraspectral Imager

    SBC: Kestrel Corporation            Topic: N/A

    This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  9. A Compact X-Ray Laser

    SBC: Tetra Corporation            Topic: N/A

    The advanced technology described in this proposal promises to increase the performance of laboratory and, specifically, tabletop x-ray lasers by up to an order of magnitude. Such gains in performance coupled with compact technology will lead to the introduction of the world s first table-top, commercial x-ray laser. Tetra proposes to develop an advanced driver for the laboratory laser based upo ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  10. Ultra-high Dielectric Constant Dielectric Materials

    SBC: TPL, INC.            Topic: N/A

    NON-NUCLEAR APPROACHES ARE SOUGHT FOR HIGH ENERGY DENSITIES FOR SPACE POWER SYSTEMS. ONE CRITICAL COMPONENT TO ACHIEVE IMPROVED PERFORMANCE IS CAPACITOR STORES. THESE ARE DEPENDENT UPON ADVANCES IN LOW LOSS, HIGH ENERGY/HIGH POWER DENSITY STORAGE MATERIALS. A UNIQUE INORGANIC COMPOSITE IS PROPOSED FOR INVESTIGATION AS A HIGH ENERGY DENSITY STORAGE MATERIAL. AN APPROACH IS FORMULATED BASED ON SOL-G ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government