List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Novel Adhesives For Space Applications

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Aeronautics and Space Administration
  2. Family Of Advanced Ablative Heat Shields Of Moderate-To-Low Density

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Aeronautics and Space Administration
  3. Non-Polluting Solvent And System For Surface Cleaning

    SBC: ENVIRONMENTAL TECHNOLOGY & EDUCATION CTR            Topic: N/A

    N/A

    SBIR Phase I 1997 National Aeronautics and Space Administration
  4. High-Performance Environmentally Safe Refrigerant

    SBC: ENVIRONMENTAL TECHNOLOGY & EDUCATION CTR            Topic: N/A

    N/A

    SBIR Phase I 1997 National Aeronautics and Space Administration
  5. HYPER-SODAR

    SBC: Sensor Technology Research, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1997 National Aeronautics and Space Administration
  6. A NONINTRUSIVE REAL TIME ROCKET PLUME DIAGNOSTIC USING NEAR-INFRARED DIODE LASER SENSORS

    SBC: Southwest Sciences, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1997 National Aeronautics and Space Administration
  7. Micron-Sized Fibrous Oxide Electrode Materials For High Energy Density, Rechargeable Lithium Batteries

    SBC: TPL, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Aeronautics and Space Administration
  8. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Inorganic Confromal Coatings for SIC Packaging

    SBC: TPL, INC.            Topic: N/A

    Glass is an attractive material for microelectronic packaging because it is hermetically sealing, has a low coefficient of thermal expansion, and is compatible with d.c. circuits. Unfortunately, the working temperature of glass is too high for this application. Low-temperature processing of a sol-gel derived, aluminosilicate material for hermetic seals is proposed for electronic packaging. This ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government