List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    The proposed research combines an innovative eigenvector method with other electromagnetic techniques to produce a hybrid approach towards solving the EM coupling to satellite cavity problem. The physical structure is divided into an exterior region and one or more interior regions. The exterior region is modeled with method of moments (MOM) and or hybrids of MOM with the uniform theory of diffr ...

    SBIR Phase II 1997 Department of DefenseAir Force
  2. Interface-Driven Multidisciplinary Design of Large-Scale Aircraft Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Under the proposed research an Interface-Driven Design Manager (IDM) for CAD packages will be developed to greatly reduce the design cycle time for aircraft structures. The IDM represents a first attempt to fully integrate powerful new interface element and design management technologies into the CAD environment. These emerging technologiies have the potential for making multidisciplinary design ...

    SBIR Phase II 1997 Department of DefenseAir Force
  3. Armament Research

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Recent efforts in the target vulnerability community (fixed ground targets, mobile ground targets, and aircraft) have focused on enhancing the blast and fragmentation modeling from weapon detonations. This includes modeling propagation of the detonation effects from the weapon through their interaction with the target geometry, to the development of loads on and response of the target structure. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  4. Slipper Wear/Gouging Phenomena

    SBC: Applied Research Associates, Inc.            Topic: N/A

    The objective of this work is to develop analytical techniques to characterize wear and gouging phenomena of slippers at speeds up to hypersonic and demonstrate means to evaluate or reduce slipper wear/gouging. Specifically, we will develop analytical techniques that can be used to predict slipper wear patterns and gouging phenomena throughout the sled velocity regime to Mach 10. This will inclu ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. Low Cost Curing and Repair Process for Composites

    SBC: ADVANCED PROCESSING TECHNOLOGY, INC.            Topic: N/A

    The use of advanced composite materials in all applications has increased dramatically, but the methods for managing and processing have remained unchanged for thirty years. Advanced, mulitple sensor technology has been demonstrated to reduce process time and costs. AvPro proposes to develop a single sensor system to provide multiple data inputs. It would be a means to validate models for proce ...

    SBIR Phase II 1997 Department of DefenseAir Force
  6. Miniature Pulsed Power Generators

    SBC: Explosive Pulsed Power            Topic: N/A

    EPPI proposes to develop a miniaturized pulsed power generator that produces a short duration, high current and high voltage pulse. The chemical energy available from high explosives is 5000 Joules per gram. The challenge is to efficiently convert the chemical energy to electrical energy. Flux Compression Generator (FCG) efficiencies of several percent have already been demonstrated. A 5 cubic ...

    SBIR Phase II 1997 Department of DefenseAir Force
  7. Ultra-Wideband Waveguide Bends Using Continuously Varying Dielectric (CVD) Materials

    SBC: FARR RESEARCH, INC.            Topic: N/A

    Bends in waveguides are a problem for high-voltage Ultra-Wideband (UWB) systems. The difficulty arises because only a straight section of standard transmission line can support a pure TEM mode. And a pure TEM mode is necessary to preserve the risetime of the transmitted impulse. When there is a bend in the waveguide, the transmitted signal is a broader impulse than the incident signal. This ca ...

    SBIR Phase I 1997 Department of DefenseAir Force
  8. Multifunction Impulse Radiating Antenna

    SBC: FARR RESEARCH, INC.            Topic: N/A

    Ultra-Wideband (UWB) systems are currently needed to serve a variety of Navy missions. One of the components of UWB systems that requires much careful thought and innovation is the antennas, since most of the classical antennas are useful only for more narrow bandwidths. Recently, a class of antenna known as Impulse Radiating Antennas (IRA) have received considerable attention. Th ...

    SBIR Phase II 1997 Department of DefenseAir Force
  9. Multifunction Impulse Radiating Antenna

    SBC: FARR RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseAir Force
  10. Production Line EMI Examination System (PLEXIS)

    SBC: FIORE INDUSTRIES INC.            Topic: N/A

    Modern medical equipment has become increasingly vulnerable to disruption by external signals. Electromagnetic Interference (EMI) from both medical and non-medical systems has been blamed for a variety of disruptions, in some cases leading to death. The high cost of EMI has prevented manufacturers from carrying out extensive characterizations of their systems. Fiore intends to reduce the cost p ...

    SBIR Phase II 1997 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government