List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Multi-Object Deployment System (MODS)

    SBC: LOADPATH, LLC            Topic: MDA15018

    Implementing multiple object payloads on a single boost vehicle is a force multiplier that has the potential to overcome countermeasure challenges. The LoadPath Multiple Object Deployment System (MODS) is an advanced mechanism that will enable reliable Multi-Object Payloadrestraint and deployment.MODS provides a compact integrated design that supports varying quantities of kill vehicles per booste ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  2. Robust Multi-Fidelity Modeling for HEL Systems

    SBC: TIMELIKE SYSTEMS, LLC            Topic: MDA15016

    Modeling and simulation has long played a crucial role in the design and development of High Energy laser systems.Historically, two distinct types of optical performance models for HEL system models have been very important: wave optics models, and scaling law models.Wave optics models are both more accurate and more robust, yielding reliable performance predictions even for systems incorporating ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  3. Shock Hardened Inertial Measurement Unit (SHIMU)

    SBC: A-TECH CORPORATION            Topic: MDA15026

    The team of ATA and SNL is developing the Shock Hardened Inertial Measurement Unit (SHIMU) with robust MEMS inertial components that can survive severe shock and vibration loads and operate effectively during the launch sequence and high-G maneuvers typical of missile defense applications.Enabling technologies include very high aspect ratio proof mass suspensions that provide high out-of-plane mot ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  4. Dual Band Long-Wave Infrared p-type InAs/(In)GaSb Superlattice Focal Plane Arrays

    SBC: SK Infrared, LLC            Topic: MDA10012

    The objective of the overall STTR program is to develop a high performance mid-format dual band long wave infrared (IR) focal plane array (FPA) using p-type InAs/(In)GaSb strained layer superlattices (SLS). The project consists of three primary research thrusts including (1) improvement of quantum efficiency, (2) optimized sidewall passivation, and (3) focal plane array fabrication and testing. ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  5. Trajectory Reconstruction Algorithms for Consistent Event Registration (TRACER)

    SBC: A-TECH CORPORATION            Topic: MDA14003

    Team ATA proposes to extend development through Phase II for a set of Trajectory Reconstruction Algorithms for Consistent Event Registration (TRACER) that will estimate the time and accurate 6-state track estimates of the breakup event of a ballistic exo-atmospheric object.TRACER is based on the Bayesian-based mathematical framework of finite set statistics (FISST).The Missile Defense Agencys comm ...

    SBIR Phase II 2016 Department of DefenseMissile Defense Agency
  6. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Inorganic Confromal Coatings for SIC Packaging

    SBC: TPL, INC.            Topic: N/A

    Glass is an attractive material for microelectronic packaging because it is hermetically sealing, has a low coefficient of thermal expansion, and is compatible with d.c. circuits. Unfortunately, the working temperature of glass is too high for this application. Low-temperature processing of a sol-gel derived, aluminosilicate material for hermetic seals is proposed for electronic packaging. This ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  9. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Development of Safe, Effective Difluoramination Reagents

    SBC: TPL, INC.            Topic: N/A

    Rocket motors that develop greater thrust with lower weight and volume require-ments are an ever present goal of the BMDO. One method of providing this is through formulation of higher energy propellant mixtures. TPL proposes to develop a new method of effectively producing new high perfor-mance propellant constituents for launch, orbit-orbit transfer and station keeping propulsion systems. The p ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government