List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Extensible Beamformer for Portable Imaging Sonar

    SBC: Q-DOT, INC.            Topic: N/A

    Q-DOT proposes to develop a unizue, lower-power, low-cost beamformer for portable imaging sonars. The original two chip set will form 100 beams from 100 input channels. A 0.3 cm2 BiCMOS chip comprises a low noise amplifier (LNA), a time-gain control (TGC), an apodizer and a Delta-Signma modulation (ADC) for each channel. A 0.66 cm2 CMOS chip accepts 100 digital input channels and produces 100 d ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Cost-effective Optical Correlator for Security Applications

    SBC: Boulder Nonlinear Systems, Inc.            Topic: N/A

    Pattern recognition systems using optical correlation are being developed. The optical correlator is a powerful tool since it simultaneously processes large data arrays. This capability reduces data handling and process control, makes the system less susceptable to obstruction and increases throughput. An optical correlator is also a phase sensitive detector. It can read an optical phase mask ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. A Two-Dimensional Avalanche Photodiode Array Suitable for Near IR LADAR

    SBC: Silicon Mountain Design, Inc.            Topic: N/A

    SMD proposes the design and fabrication of a two-dimensional APD array. A novel APD array is proposed which requires low bias voltages, thus making it compatible with both CMOS and CCD multiplexer designs. The on-chip CMOS/CCD circuitry will allow for multiplexing of a large number of pixels to a single output. Further, each pixel in the APD array will have its own range detection circuitry allo ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government