List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. HLA Federation Implementation Tools

    SBC: AEGIS TECHNOLOGIES GROUP, INC., THE            Topic: N/A

    The Defense Modeling and Simulation Office (DMSO) has developed the High Level Architecture (HLA) as one of the principle components of a DoD-wide Common Technical Framework for modeling and simulation (M&S). Unlike previous distributed simulation technologies such as DIS and SIMNET, HLA provides federation developers, via the Object Model Template (OMT), the means to define the structure and for ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Modeling Laminar to Turbulent transistion for improved high lift predictions

    SBC: AEROSOFT INC            Topic: N/A

    AeroSoft, Inc. proposes to develop, incorporate and validate transition and anisotropic turbulence models for improving the low-Reynolds number predictions for high-lift airfoil configurations. The turbulence-modeling package will use Menter's two equati

    SBIR Phase I 1997 Department of DefenseNavy
  3. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Operational Trainer for FFG-7 AAW Combat System

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    The proposed prototype Operational Trainer for the FFG-7 AAW Combat System will provide the US Navy with a means for training the FFG-7 AAW combat team to operate their equipment in condition 1 watch stations. Each watch station will be provided with the ability to train as they fight by allowing continuous on-board AAW training that includes all elements of the combat system with interactions as ...

    SBIR Phase I 1997 Department of DefenseNavy
  5. Fretting Wear Resistant Coatings for Turbine Engine Applications

    SBC: ANALYTICAL SERVICES & MATERIALS, INC.            Topic: N/A

    Attachment areas in the regions of rotating components of gas turbine engines degrade due to fretting wear and fatigue. Plasma sprayed coatings are often used to protect these regions. A thin, dense, Ti(C, N) composite coating based on sol-gel process is proposed. The simple, cost-effective sol-gel process will coat complex shapes and will provide superior performance against fretting wear. Di ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. High Resolution Time-Frequency Representations

    SBC: AMRON CORPORATION            Topic: N/A

    The objective of the proposed Phase I work is to demonstrate the feasibility of using the Choi-Williams distribution to estimate the time ¿ frequency distribution of transients of interest to the IUSS. The specific objectives are to develop a metric for IUSS images and to show that the Choi-Williams distribution of these images may be used for classification. The Choi-Williams distribution is ...

    SBIR Phase I 1997 Department of DefenseNavy
  7. Engineering Models of Reactive Munitions and Damage Effects

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict structural response and the associated damage to air targets from reactive munitions. The objectives for the proposed Phase I study effort are to develop candidate launch conditioning, reaction initiation and reaction rate methodology, to incorporate existing ballistic, blast and quasi-static pres ...

    SBIR Phase I 1997 Department of DefenseNavy
  8. Hard Target Penetrator End-Game Guidance

    SBC: CAMBER CORP.            Topic: N/A

    Precision strike weapons have been proved repeatedly to be able to provide substantial tactical advantages. Much attention in the past has been focused on improving the strike position accuracy. To penetrate a consolidated hard target, however, the missile velocity and impact angle also plays a significant role. This raises the requirement for the capability to precisely control the missile att ...

    SBIR Phase I 1997 Department of DefenseNavy
  9. Innovative Large Caliber Gun for Naval Gun Fire Support

    SBC: Central Technology, Inc.            Topic: N/A

    The objective of this project is to design a new large caliber naval gun to fit in a relatively small volume within a ship and yet be capable of firing ranges considerably greater than are presently available from equal caliber guns and ammunition. This gun will have a very short recoil whose greater recoil forces will be passed directly to major load bearing structure near the ship's ke ...

    SBIR Phase I 1997 Department of DefenseNavy
  10. Gap Effects and Actuator Post Influence on Missile Control Fin Design

    SBC: CFD Research Corporation            Topic: N/A

    A CFD methodology is proposed, based on the grid oversetting approach, that will assess both control fin gap effects and the presence of the actuator post. The chimera method is technically mature and perfectly suited to the ultimate goal of au During Phase I, the proposed approach will be demonstrated for a fin configuration to be chosen in consultation with NAWC and Hughes Missile Systems, a ...

    SBIR Phase I 1997 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government