Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. HLA Federation Implementation Tools

    SBC: AEGIS TECHNOLOGIES GROUP, INC., THE            Topic: N/A

    The Defense Modeling and Simulation Office (DMSO) has developed the High Level Architecture (HLA) as one of the principle components of a DoD-wide Common Technical Framework for modeling and simulation (M&S). Unlike previous distributed simulation technologies such as DIS and SIMNET, HLA provides federation developers, via the Object Model Template (OMT), the means to define the structure and for ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Parallel Optical Memory Interconnects

    SBC: LSA            Topic: N/A

    In this proposal, we describe a novel approach for realizing a parallel, nonmechical, read/write interconnection for angle-multiplexed three-dimensional (3-D) optical memories. Our concept represents a significant first step required toward taking this critical memory technology from the laboratory and inserting it into operational systems. The concept utilizes novel optomechanical packaging and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Resin Transfer Molding of High Temperature Composites

    SBC: Maverick Corporation            Topic: N/A

    Resin Transfer Molding (RTM) offers the opportunity for significant cost savings in the fabrication of polymer matrix composite structures. However, the realization of this cost savings has been limited to lower temperature (e.g. epoxy) matrix composites. The main reason for this has been that available high temperature (e.g. polymide) composites have not possessed the characteristics which make ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Representation and Transmission of Non-Visual Stimuli Using the HLA

    SBC: Mystech Assoc., Inc.            Topic: N/A

    This effort will develop an HLA compliant representation of non-visual stimuli with the intention of utilizing the models developed in Phase I effort to provide data for "human" mannequin stimulation in Phase II. The Phase II goal is to have the mannequin respon in a physiologically realistic manner to the non-visual stimuli data that will be passed to it over a network and via an interface. Suc ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Commercialization of C4I Simulation Components for Disaster Planning and Recovery Using HLA

    SBC: Mystech Assoc., Inc.            Topic: N/A

    Federal, state, local, and military missions for Disaster Relief, Emergency Action, and Humanitarian Assistance (DREAHA) require all of the traditional command, control, communications, computer and intelligence (C4I) functions used by military units for traditional warfare. New civilian systems that leverage and reuse military C4I systems to plan, prepare, identify, vector, monitor, and recover ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Hybrid Composites Manufacturing Technology Braiding/Filament Winding

    SBC: PRODUCTION PRODUCTS MANUFACTURING & SALES CO., INC.            Topic: N/A

    Production Products will develop an integrated, multi-axis preform manufacturing system that will fully integrate, hybridize, and automate the braiding/filament winding preform manufacturing process. This hybridized, automated system will provide significant process improvements and cost savings compared with the current preform manufacturing process developed in the Air Force ManTech Engine and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. AgentsTools- intelligent agents for analysis and modeling

    SBC: SYSTRAN FEDERAL CORP.            Topic: N/A

    SYSTRAN, and our subcontractor , Katherine Morse of SAIC (San Diego), will design and selectively demonstrate (in Phase I), and develop and significantly demonstrate (in Phase II), a series of intelligent software agents - collectively called AgentsTools - that will effect the analysis and modeling of data collected in real-time during HLA compliant simulations. AgentsTools will be developed usin ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government