You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SBIR Phase I: Fiber Impregnation using Molten Thermoplastic Polymer Spray

    SBC: Adherent Technologies, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop a prepreg material that, while maintaining the advantages of a powder towpreg system, will eliminate the use of high price, finely ground powders. By generating fine particles in situ using aerosol formation from molten polymers two steps will be eliminated from the manufacturing process -- powder grinding and powder sin ...

    SBIR Phase I 2003 National Science Foundation
  2. A CAD-Programmable Environment for Developing CBM Systems for Rotorcraft

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N/A

    The objective of the Phase II research is to utilize the lessons learned from the Phase I risk reduction work to develop a prototype CAD-programmable environment for the development of condition-based maintenance systems for rotorcraft. This developmentenvironment features a CAD scenario modeler for constructing, via click n' drag modeling, fault-to-failure damage models which can account for the ...

    SBIR Phase I 2003 Department of DefenseOffice of the Secretary of Defense
  3. STTR Phase I: Integrated Magneto-Optic Current Sensor for Power Electronics Modules

    SBC: Airak, Inc.            Topic: N/A

    This Small Business Technology Transfer (STTR) Phase I project proposes to develop magneto-optical current and temperature sensors capable of direct integration into power electronic modules, with the design goal of improving reliability and survivability of the power conversion and control circuitry. Existing power electronics designs generally use one of three components to sense current in pow ...

    STTR Phase I 2003 National Science Foundation
  4. SBIR Phase I: Aerosolized Biological Agents Detection

    SBC: Allomics, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop a fast, reliable and sensitive technology that can identify the nature and the content of the particles in aerosol samples, and provide an early warning of the presence of bio-warfare agents. Current biological agent detection systems rely on point detectors that cannot sample actual aerosol condition in real-time. Additio ...

    SBIR Phase I 2003 National Science Foundation
  5. SBIR Phase I: Nano-Aluminum Production for Lithium Ion Battery Electrodes

    SBC: AP Materials            Topic: N/A

    This Small Business Innovation Research Phase I project will develop low-oxygen, nanometer-sized aluminum powders with a narrow particle size distribution to be employed in the anodes of lithium ion batteries. Specifically, this research addresses the need to process nanometer sized aluminum particles such that they do not spontaneously oxidize on contact with air or moisture so the particles may ...

    SBIR Phase I 2003 National Science Foundation
  6. SBIR Phase II: High Surface Area Tantalum Powder for Capacitor Applications

    SBC: AP Materials            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will scale-up a new technology for producing high-surface area tantalum powders for the electronic capacitor industry. The existing technology is over 30 years old and cannot keep pace with the needs of smaller electronics, which require tantalum particles in the nanometer size range. In addition, environmental factors are driving t ...

    SBIR Phase I 2003 National Science Foundation
  7. SBIR Phase I: Bottom Anti-Reflective Coatings- BARCs- for Production of Advanced Semiconductor Devices by 157 nm Lithography

    SBC: Brewer Science Incorporated            Topic: N/A

    This Small Business Innovation Research Phase I project will develop bottom anti-reflective coatings (BARCs) for production of advanced semiconductor devices by 157 nm lithography . The NSF Phase I technical objectives are to demonstrate the feasibility of potential technical approaches to workable 157nm BARCs. The prototype 157 nm BARCs will be produced and characterized for critical industry req ...

    SBIR Phase I 2003 National Science Foundation
  8. SBIR Phase II: Innovative And Cost-Effective Process for Net-Shape Microfabrication of Ceramic Components

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will develop a ceramic hydrogen fuel appliance (CHFA) using ceramic microreactor modules (CMMs) using a low-cost, net-shape manufacturing process, and a new material, that was developed in the Phase I project. The new material developed was demonstrated to have excellent capability for cost-effective microfabri ...

    SBIR Phase I 2003 National Science Foundation
  9. SBIR Phase I: A Simulation Tool for the Prediction of Performance of Liquid-Feed Direct Methanol Fuel Cells

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project focuses on the development of commercial software, based on computational fluid dynamic (CFD) techniques, to predict performance of liquid-feed direct methanol fuel cells (DMFC). While computational modeling of fuel cells has been widespread in the solid oxide fuel cell (SOFC) and hydrogen-air proton exchange membrane fuel cell (PEMFC ...

    SBIR Phase I 2003 National Science Foundation
  10. SBIR Phase I: Hybrid Fabrication of Very High Efficiency Gratings

    SBC: Diffraction, Ltd            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project proposes to address the need for large highly efficient gratings as essential components of astronomical, spectroscopic, and optical telecommunications equipment. The goal of the proposed research program is to develop a hybrid manufacturing process combining holography and preferential chemical etching to produce large area diffractio ...

    SBIR Phase I 2003 National Science Foundation
US Flag An Official Website of the United States Government