Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Parallel Optical Memory Interconnects

    SBC: LSA            Topic: N/A

    In this proposal, we describe a novel approach for realizing a parallel, nonmechical, read/write interconnection for angle-multiplexed three-dimensional (3-D) optical memories. Our concept represents a significant first step required toward taking this critical memory technology from the laboratory and inserting it into operational systems. The concept utilizes novel optomechanical packaging and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Representation and Transmission of Non-Visual Stimuli Using the HLA

    SBC: Mystech Assoc., Inc.            Topic: N/A

    This effort will develop an HLA compliant representation of non-visual stimuli with the intention of utilizing the models developed in Phase I effort to provide data for "human" mannequin stimulation in Phase II. The Phase II goal is to have the mannequin respon in a physiologically realistic manner to the non-visual stimuli data that will be passed to it over a network and via an interface. Suc ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Commercialization of C4I Simulation Components for Disaster Planning and Recovery Using HLA

    SBC: Mystech Assoc., Inc.            Topic: N/A

    Federal, state, local, and military missions for Disaster Relief, Emergency Action, and Humanitarian Assistance (DREAHA) require all of the traditional command, control, communications, computer and intelligence (C4I) functions used by military units for traditional warfare. New civilian systems that leverage and reuse military C4I systems to plan, prepare, identify, vector, monitor, and recover ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Hybrid Composites Manufacturing Technology Braiding/Filament Winding

    SBC: PRODUCTION PRODUCTS MANUFACTURING & SALES CO., INC.            Topic: N/A

    Production Products will develop an integrated, multi-axis preform manufacturing system that will fully integrate, hybridize, and automate the braiding/filament winding preform manufacturing process. This hybridized, automated system will provide significant process improvements and cost savings compared with the current preform manufacturing process developed in the Air Force ManTech Engine and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. HLA-ENHANCED DISTRIBUTED GAMING ENVIRONMENT

    SBC: Trident Systems Incorporated            Topic: N/A

    The High Level Architecture (HLA) for Modeling and Simulation is evolving into the DoD standard paradigm for developing distribution simulation environments through the integration of disparate simulations ("federates"). HLA also has significant potential to provide similar benefits to the commercial software industry in general, and the online distributed entertainment industry in particular. H ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. DATA MANAGEMENT/ANALYSIS TOOLS

    SBC: VIRTUAL TECHNOLOGY CORP.            Topic: N/A

    The Defense Modeling & Simulation Office (DMSO) is in the process of defining a common technical framework for modeling and simulation to promote interoperability and reuse, and has established the High-Level Architecture (HLA) to which all DoD simulation must conform. This decree has led to the need for a modular data management system capable of passively collecting data from an HLA federation ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government