You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. N/A

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  2. Multipolicy Information Assurance for Microsensor Networks

    SBC: ATC-NY INC            Topic: N/A

    Not Available Q-DOT proposes to develop a miniature oscillator MINO) in a small (0.2 x 0.2 x 0.5 ), PCMCIA-card-compatible module. The MINO will oscillate at a frequency in the range of 1-10 GH (nominally 6Ghz). The MINO is specifically designed to drive high performance analog-to-digital converters (ADCs) in advanced digital receivers. These 16-bit ADCs are characterized by 100mhz bandwidth ...

    SBIR Phase I 1999 Department of DefenseOffice of the Secretary of Defense
  3. 4h-Sic GTO Device Structural With Improved Reliability at High Blocking Voltage

    SBC: Intelligent Automation, Inc.            Topic: N/A

    Not Available Existing approaches to the detection of vehicles from SAR imagery are handicapped by a high false alarm rate, especially when used in high clutter environments such as urban areas and forested regions. In this Phase I proposal. Image Corp, Inc. proposes a system for SAR-based vehicle detection that makes extensive use of contextual information derived from the SAR image itself. Mu ...

    SBIR Phase I 1999 Department of DefenseOffice of the Secretary of Defense
  4. N/A

    SBC: Jeneric/pentron, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  5. N/A

    SBC: LNK CORP., INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  6. N/A

    SBC: QUALTECH SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  7. Breakdown Voltage Enhancement Through Lateral Vapor Phase Epitaxy

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    Not Available In the course of developing the solar powered Pathfinder and Centurion high altitude long endurance (HALE) uninhabited air vehicles (UAVs), AeroVironment has done extensive investigations into the effects of atmospheric turbulence on this unusual class of aircraft. This investigation found that turbulent loads are the driving factor in the design of these vehicles. In particular, ...

    SBIR Phase I 1999 Department of DefenseOffice of the Secretary of Defense
  8. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  9. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Advanced Six-Degree-of-Freedom (6-D) Laser Measurement System

    SBC: AUTOMATED PRECISION, INC.            Topic: N/A

    In order to remain competitive in today's global marketplace, U.S. manufacturers are constantly striving to hold tighter and tighter tolerances on the parts that they produce. What this means is that the manufacturer needs to better control the machines that they use, and in order to do that they need an instrument that can quickly and easily characterize the geometric properties of the machines ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government