You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Highly Corrosion Resistant Aluminum Alloys: Innovative Processing Methods to Enhanced Corrosion Resistance (e.g., layered structures, etc.)
SBC: TOUCHSTONE RESEARCH LABORATORY, LTD. Topic: OSD09C03The objective of this proposed Phase II work is to develop a production method for manufacturing rolled plates of a high-strength aircraft aluminum alloy (7075) with high SCC (stress corrosion cracking) resistance. The corrosion resistance is to be improved without a loss in tensile strength. The basic operational processing procedure is to produce aluminum alloy plate through roll bonding of a co ...
SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense -
Lithium-Ion (Li-ion) and Lithium-ion Polymer (Li-polymer) Battery Safety
SBC: PHYSICAL SCIENCES INC. Topic: OSD09EP1Physical Sciences, Inc. (PSI) has demonstrated that electroactive polymer coatings (EAP) may be applied to the surface of the cathode materials for lithium-ion batteries to protect against catastrophic cell failure. These EAP coatings form an electrochemical"switch"that can prevent catastrophic failure in lithium-ion batteries by reversibly changing from a conductor to an insulator on overdischarg ...
SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense -
Mechanical Characterization of Energetic Materials
SBC: DYNAMIC SYSTEMS & RESEARCH CORP Topic: OSD09W02Through this research effort, DSR is developing test equipment that can be used by the Air Force to investigate inert and live explosive material properties through a variety of different pressure and temperature environments. Strain-rate levels are adjustable and will vary between 10-5-10-2 s-1 depending upon the stiffness and strength of the test material. 25.4-mm-diameter specimens with lengt ...
SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense -
N/A
SBC: 21ST CENTURY SYSTEMS, INC. Topic: N/AN/A
SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense -
N/A
SBC: AMERICAN SUPERCONDUCTOR CORPORATION Topic: N/AN/A
SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense -
N/A
SBC: APTIMA INC Topic: N/AN/A
SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense -
N/A
SBC: AZIMUTH INC Topic: N/AN/A
SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense -
N/A
SBC: COVALENT ASSOC., INC. Topic: N/AN/A
SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense -
N/A
SBC: Federal-Fabrics-Fibers, Inc. Topic: N/AN/A
SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense -
N/A
SBC: FOSTER-MILLER, INC. Topic: N/AN/A
SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense