You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Compact, Lightweight Isolation Platform (CLIP)
SBC: A-TECH CORPORATION Topic: H901NASA has a critical need for improved bi-directional data transmission rates from a variety of spacecraft to Earth. NASA estimates that the current Mars to Earth transfer rate of 6 Mbps might be increased to 600Mbps using a Laser Communication (LC) system. Beam jitter caused by spacecraft-based motion must be reduced to sub-microradian levels to enable beaconless optical beam pointing. ATA will ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
300C/15 kW power converter with AlGaN/GaN-Si MOS-HFETs for electric propulsion systems
SBC: GENESIC SEMICONDUCTOR INC. Topic: E101Capitalizing on a strong expertise in III-Nitride epitaxy, GaN-Si power device designs, and wide-bandgap power electronics, researchers at GeneSiC Semiconductor propose a SBIR program focused on the development of 15 kW/300C-rated power converters using AlGaN/GaN-Si MOS-HFETs and Schottky rectifiers. The proposed AlGaN/GaN-Si power converters to be developed in this program will usher in a new gen ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Quick Spacecraft Thermal Analysis Tool
SBC: LOADPATH, LLC Topic: H304For spacecraft design and development teams concerned with cost and schedule, the Quick Spacecraft Thermal Analysis Tool (QuickSTAT) is an innovative software suite that will significantly reduce labor costs and effort associated with the design, analysis, and optimization of spacecraft. Unlike traditional analysis where highly-trained engineers spend days to months developing, running, and evalua ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Additive Friction Stir Deposition of Aluminum Alloys and Functionally Graded Structures
SBC: AEROPROBE CORPORATION Topic: H502State-of-the-art additive manufacturing technologies for metal parts have evolved primarily around powder metallurgy and fusion welding-based processes. These processing methodologies yield parts with inferior mechanical and physical properties as compared to wrought metal of the same composition. Additionally, the production rates for even the fastest processes are relatively low, the part enve ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Fiber MOPA for Ascends
SBC: FIBERTEK, INC. Topic: S101CO2 sensing using absorption bands near 1570nm is very attractive by taking advantage of the mature fiber-amplifier technology derived from fiber-optic telecom heritage. This necessitates sufficient power scaling in 1.5 micrometer fiber-amplifiers, either in the pulsed-mode, or in the cw-mode for modulation spectroscopy. In this SBIR program we propose the design, optimization, experimental evalua ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Solid State Transmitters for Water Vapor and Ozone DIAL Systems
SBC: FIBERTEK, INC. Topic: E301The focus of this Select Phase II program is to build and deliver laser components both for airborne water vapor and ozone DIAL systems. Specifically, Fibertek proposes to deliver to NASA the following prototype systems: 1) A complete water vapor DIAL transmitter with single-line output tunable over the 936 nm water vapor line, 2) A wavelength converter for ozone DIAL compatible with the ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Self-Powered Magnetothermal Fluid Pump
SBC: Prime Photonics, LC Topic: H304Advances in the capabilities of electronics have enabled high power density devices. However, even in light of advances in electronics efficiency figures, the increased power density operational points result in the generation of excess heat. In order to maintain efficiency and to product sensitive components from thermally-induced failure, intelligent rejection of thermal energy is often a crit ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Non Thermal Plasma Assisted Catalytic Reactor for CO2 Methanation
SBC: LYNNTECH INC. Topic: H101In situ production of methane as propellant by methanation of CO2, also called Sabatier reaction, is a key enabling technology required for sustainable and affordable human exploration of Mars. The Sabatier reaction is conventionally carried out in a fixed bed catalyst at high temperatures of 350-400 ?C. For the long duration future Mars missions (~ 18 months expected stay on Mars), the fixed bed ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Integrated Visualization Environment for Science Mission Modeling
SBC: Phoenix Integration, Inc. Topic: S504NASA is emphasizing the use of larger, more integrated models in conjunction with systems engineering tools and decision support systems. These tools place a corresponding stress on legacy engineering visualization systems which now are required to handle larger data sets, provide more intuition to the user, integrate well with many other tools, and help the user with his/her ultimate goal: improv ...
SBIR Phase II 2014 National Aeronautics and Space Administration -
Precision Remote Sensor for Oxygen and Carbon Dioxide
SBC: MESA PHOTONICS LLC Topic: S109The Phase II project will lead to the design, construction, and field-testing of a prototype PHOCS instrument for atmospheric column retrievals of oxygen and carbon dioxide. The carbon dioxide wavelength range may also be extended to add methane and carbon monoxide measurements depending on laser performance. The prototype will include the improvement to heterodyne spectroscopy invented in Phase I ...
SBIR Phase II 2014 National Aeronautics and Space Administration