Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Compact, High Capacity Parallel Optical Memories

    SBC: Accuwave Corp.            Topic: N/A

    In this proposed SBIR program, Accuwave will investigate and demonstrate architectures for compact hologrpahic storage using materials and system innovations to reduce complexity and improve performance. Crosstalk, data formatting, input/output interfaces, and other relevant parameters will be characterized. Both wavelength and angle multiplexing, as well as its combination, will be used to prov ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. High Performance Piezoceramic Coatings for Ultrasound Applications

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an innovative new process for the manufacture of smart structures using a High Velocity Oxy-Fuel (HVOF) thermal spray process. This simple, multi-step process will be capable of depositing electroded piezoceramic coatings. The coatings will be poled while still hot, reducing poling times and voltages while increasing poling efficiency. Process times will be extremely short. The pr ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. HLA Federation Implementation Tools

    SBC: AEGIS TECHNOLOGIES GROUP, INC., THE            Topic: N/A

    The Defense Modeling and Simulation Office (DMSO) has developed the High Level Architecture (HLA) as one of the principle components of a DoD-wide Common Technical Framework for modeling and simulation (M&S). Unlike previous distributed simulation technologies such as DIS and SIMNET, HLA provides federation developers, via the Object Model Template (OMT), the means to define the structure and for ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  5. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. A Five Volt Lithium Battery

    SBC: COVALENT ASSOC., INC.            Topic: N/A

    In this Phase I SBIR program we propose to develop a novel high voltage (5V) lithium-ion battery suitable for portable electronics equipmentand transportation applications. Lithium-ion batteries are already commercially available and typically consist of carbon anode, non-aqueous electrolyte and lithium transition metal oxide cathode such as LiCoO2, LiNiO2 or LiMnO4. These systems have an operat ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  7. Hand Held High Resolution Imagin Devices for Aircraft Substructures

    SBC: Eikos, Inc.            Topic: N/A

    Eikos LLC will evaluate two approaches, millimeter waves and opto-acoustics, for locating edges and holes in substructure that are hidden under exterior panels and skins during aircraft assembly. These devices will work in a camera-like fashion to allow non-destructive remote imaging. Eikos has developed promising approaches to both techniques that have the potential to be low cost and easy to u ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. TOS Enhanced Phthalonitrile Resins with MDC Composite Stitching Technology

    SBC: Eikos, Inc.            Topic: N/A

    Eikos LLC will modify and enhance the chemistry of the NRL developed phthalonitrile resin to meet the 700F TOS requirements of high temperature RTM and RFI aerospace composites. Eikos is intimately familiar with the chemistry of the phthalonitrile resin because of our efforts to scale the production of the current bases resin from the laboratory to the pilot plant. Eikos has teamed with McConne ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Development of a Commercial FOM for 3D Interactive Entertainment Applications

    SBC: Perceptronics Solutions, Inc.            Topic: N/A

    Perceptronics and its team members, Litton Guidance & Control Systems and Infinity Multimedia, will demonstrate that the High Level Architecture (HLA) provides a viable approach for multi-participant entertainment applications and implement an HLA federation and a Federation Object Model (FOM) for this domain. A simple tennis-like game with both 2D and 3D visualization will be used as representat ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government