Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Compact, High Capacity Parallel Optical Memories

    SBC: Accuwave Corp.            Topic: N/A

    In this proposed SBIR program, Accuwave will investigate and demonstrate architectures for compact hologrpahic storage using materials and system innovations to reduce complexity and improve performance. Crosstalk, data formatting, input/output interfaces, and other relevant parameters will be characterized. Both wavelength and angle multiplexing, as well as its combination, will be used to prov ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. A Novel Non-Lethal Effects Device

    SBC: Adroit Systems, Inc.            Topic: N/A

    The topic presented in this proposal has direct application to the development of non-lethal devices capable of temporarily incapacitating personnel, controlling crowds, immobilizing small vehicles, and other applications where a controlled amount of acoustic c energy needs to be delivered a a distance. The proposed effort would determine the characteristic acoustic waveforms and amplitudes gener ...

    SBIR Phase II 1997 Department of DefenseArmy
  3. Characterization and Quantification of Missile Debris Hazard to Aircraft

    SBC: ADVATECH PACIFIC, INC.            Topic: N/A

    The increasing number of missile launches and aircraft operation near missile test ranges has led to an increased hazard to the aircraft from wayward debris. The proposed study will systematically review and assemble the relevant data and applicable laws of physics into a computer program that will evaluate the actual risk for both mid-air collision between an aircraft and missile debris, and the ...

    SBIR Phase II 1997 Department of DefenseArmy
  4. High-Precision, Robust Nonlinear and Intelligent Control for Advanced Weapon Pointing Systems

    SBC: AMERICAN GNC CORPORATION            Topic: N/A

    Future combat armored vehicles, air-defense artillery, and attack heliopters are required to perform precise pointing in the presence of unpredictable terrain motions, unmodeled flexible dynamics, unmeasurable disturbances, and nonlinear/time-varying effects. To meet this challenge, a control scheme integrating nonlinear control, linear robust control and disturbance estimation/compensation will b ...

    SBIR Phase II 1997 Department of DefenseArmy
  5. Advanced 3D Solid Modeling, Virtual Animation and Control of Smart Cranes

    SBC: AMERICAN GNC CORPORATION            Topic: N/A

    This project proposes the high precision intelligent sensor based robotic control system to enhance the performance accuracy of a robotics system. The proposed design concept: (1) optimally combines several classes of sensors (e.g. touch, force, proximity, etc.) to improve the path planning and trajectory evaluation (i.e., controlled trajectory enhancement); and (2) innovatively employs multi-lev ...

    SBIR Phase II 1997 Department of DefenseArmy
  6. Fire Mission Architecture Demonstration System

    SBC: AMERICAN GNC CORPORATION            Topic: N/A

    This Phase I project proposes the development of a reference architecture and software infrastructure repository for fire control systems. The repository will be established using adyanced software technologies, such as Domain-Specific Software Architecture (DSSA) technology and software engineering technology so that the architecture and software components will be reusable, portable, compatible ...

    SBIR Phase I 1997 Department of DefenseArmy
  7. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  8. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Detector/Amplifier/Mixer Array for a Low Cost Imaging Ladar

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    Current production ladar system and components involve coherent optical system using pulse waveform. "bile demonstrating impressive accuracy and resolution, the system are coupler, difficult to manufacture, and thereby erpensive. An alternative approach is being investigated for short range system which uses an FM/CW waveform for ranging with incoherent light detection. This approach should prod ...

    SBIR Phase I 1997 Department of DefenseArmy
  10. Low Frequency (LF), Ultra Wideband (UWB), Synthetic Aperture Radar (SAR), Antennas Compatible with Unmanned Aerial Vehicles (UAV)

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    Unmanned Aerial Vehicles (UAVs) offer a lower risk and lower cost platform for the use of an Ultra Wide Band (UWE) Synthetic Aperture Radar (SAR) system for the detection of ground targets concealed by foliage. Given the size, weight, and power restrictions of a UAV, an impulse radar is an attractive radar system alternative because it offers a lighter and lower cost solution than a traditional c ...

    SBIR Phase I 1997 Department of DefenseArmy
US Flag An Official Website of the United States Government