Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Solid Waste Remediation System (SWRS) for Small Contingency Base Camps

    SBC: Altex Technologies Corporation            Topic: OSD12EP2

    To meet the requirements of the Army Solid Waste Remediation System, for Small Contingency Base Camps, Altex has developed a Compact Ward Furnace Energy Recovery System (CWFERS), which was proven feasible by testing and analysis, under a Phase I award. The system reduces fuel consumption by 92% fuel, compared to a traditional remediation system, and converts the energy in the bulk waste to hot wa ...

    SBIR Phase II 2013 Department of DefenseOffice of the Secretary of Defense
  2. Compact, High Capacity Parallel Optical Memories

    SBC: Accuwave Corp.            Topic: N/A

    In this proposed SBIR program, Accuwave will investigate and demonstrate architectures for compact hologrpahic storage using materials and system innovations to reduce complexity and improve performance. Crosstalk, data formatting, input/output interfaces, and other relevant parameters will be characterized. Both wavelength and angle multiplexing, as well as its combination, will be used to prov ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  4. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Ultra-Textured Active polymer (UTAP) Composite for High-Performance Intelligent Acoustic Transducers

    SBC: Ceramare Corporation            Topic: N/A

    This Small Business Innovative Research Phase I project seeks to combine the enhanced piezoelectric properties of single crystal perovskite ferroelectrics, recently discovered at Pennsylvania State University, with the electrostrictive properties of polyurethane to make a new class of "smart" materials for acoustic transducers. A tape casting process is used to form composite sheets compromising ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Development of a Commercial FOM for 3D Interactive Entertainment Applications

    SBC: Perceptronics Solutions, Inc.            Topic: N/A

    Perceptronics and its team members, Litton Guidance & Control Systems and Infinity Multimedia, will demonstrate that the High Level Architecture (HLA) provides a viable approach for multi-participant entertainment applications and implement an HLA federation and a Federation Object Model (FOM) for this domain. A simple tennis-like game with both 2D and 3D visualization will be used as representat ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Advanced Tooling Manufacturing for Composite Structures (ATMCS)

    SBC: Fem Engineering            Topic: N/A

    Sheet metal products have made an indispensable place for themselves in our day to day lives. Light weight, good surface finish, low finished product cost, and relatively good formability are just few of the many features that make the sheet metal products so attractive. This includes all the product lines such as automotive, aerospace, appliance, construction, instruments, heating and ventilati ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  9. HLA-Virtual Command Post

    SBC: LIONHEARTH TECHNOLOGIES, INC.            Topic: N/A

    Many simulations require tactical intelligence information and audio communication. This topic's thrust is to develop commercial applications that use the current C4I HLA constructs. A Virtual Command Post (VCP) has been desigend and build in response to an earlier solicitation and is being delivered as a proof-of-concept for CECOM's future battlefield visualization, planning and radio communica ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Parallel Optical Memory Interconnects

    SBC: LSA            Topic: N/A

    In this proposal, we describe a novel approach for realizing a parallel, nonmechical, read/write interconnection for angle-multiplexed three-dimensional (3-D) optical memories. Our concept represents a significant first step required toward taking this critical memory technology from the laboratory and inserting it into operational systems. The concept utilizes novel optomechanical packaging and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government