You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Compact, High Capacity Parallel Optical Memories

    SBC: Accuwave Corp.            Topic: N/A

    In this proposed SBIR program, Accuwave will investigate and demonstrate architectures for compact hologrpahic storage using materials and system innovations to reduce complexity and improve performance. Crosstalk, data formatting, input/output interfaces, and other relevant parameters will be characterized. Both wavelength and angle multiplexing, as well as its combination, will be used to prov ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. BioBinder Activated Carbon for Polluiton Control

    SBC: Altex Technologies Corporation            Topic: N/A

    N/A

    SBIR Phase II 1997 Environmental Protection Agency
  3. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  4. Disposable Micromachined Flow Immunoassay for Field Detection of Contaminants

    SBC: American Research Corporation of Virginia            Topic: N/A

    The use of enzyme-linked immunosorbent assay (ELISA) to detect contaminants such as solvents, fuels, and pesticides in soil and water samples is now well established. Although ELISA and related methods can facilitate analysis of samples, several washing and separation steps are involved that require 30 to 120 minutes per sample to reach equilibrium. Recently, near infrared fluorescence immunoassa ...

    SBIR Phase I 1997 Environmental Protection Agency
  5. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Low Cost, Environmentally Benign Non-Chromate Conversion Coating

    SBC: Chemat Technology, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1997 Environmental Protection Agency
  7. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. High Efficiency and Low Cost NOx Control via Promoted N-Agent Injection

    SBC: EERGC CORP.            Topic: N/A

    Prospective technologies for stationary post-combustion NOx control include: Selective Non-Catalytic Reduction (SNCR) and Selective Catalytic Reduction (SCR). These processes reduce NOx by non-catalytic or catalytic reactions with N-Agents (ammonia or urea). There are several problems with SCR, such as high capital cost, limited catalyst life, catalyst poisoning, and disposal. SNCR is less expe ...

    SBIR Phase I 1997 Environmental Protection Agency
  9. Advanced Tooling Manufacturing for Composite Structures (ATMCS)

    SBC: Fem Engineering            Topic: N/A

    Sheet metal products have made an indispensable place for themselves in our day to day lives. Light weight, good surface finish, low finished product cost, and relatively good formability are just few of the many features that make the sheet metal products so attractive. This includes all the product lines such as automotive, aerospace, appliance, construction, instruments, heating and ventilati ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  10. HLA-Virtual Command Post

    SBC: LIONHEARTH TECHNOLOGIES, INC.            Topic: N/A

    Many simulations require tactical intelligence information and audio communication. This topic's thrust is to develop commercial applications that use the current C4I HLA constructs. A Virtual Command Post (VCP) has been desigend and build in response to an earlier solicitation and is being delivered as a proof-of-concept for CECOM's future battlefield visualization, planning and radio communica ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government