List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Hybrid Composites Manufacturing Technology- Braiding/Filament Winding

    SBC: A & P TECHNOLOGY, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  3. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Ultra-Textured Active polymer (UTAP) Composite for High-Performance Intelligent Acoustic Transducers

    SBC: Ceramare Corporation            Topic: N/A

    This Small Business Innovative Research Phase I project seeks to combine the enhanced piezoelectric properties of single crystal perovskite ferroelectrics, recently discovered at Pennsylvania State University, with the electrostrictive properties of polyurethane to make a new class of "smart" materials for acoustic transducers. A tape casting process is used to form composite sheets compromising ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Parallel Optical Memory Interconnects

    SBC: LSA            Topic: N/A

    In this proposal, we describe a novel approach for realizing a parallel, nonmechical, read/write interconnection for angle-multiplexed three-dimensional (3-D) optical memories. Our concept represents a significant first step required toward taking this critical memory technology from the laboratory and inserting it into operational systems. The concept utilizes novel optomechanical packaging and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Representation and Transmission of Non-Visual Stimuli Using the HLA

    SBC: Mystech Assoc., Inc.            Topic: N/A

    This effort will develop an HLA compliant representation of non-visual stimuli with the intention of utilizing the models developed in Phase I effort to provide data for "human" mannequin stimulation in Phase II. The Phase II goal is to have the mannequin respon in a physiologically realistic manner to the non-visual stimuli data that will be passed to it over a network and via an interface. Suc ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Commercialization of C4I Simulation Components for Disaster Planning and Recovery Using HLA

    SBC: Mystech Assoc., Inc.            Topic: N/A

    Federal, state, local, and military missions for Disaster Relief, Emergency Action, and Humanitarian Assistance (DREAHA) require all of the traditional command, control, communications, computer and intelligence (C4I) functions used by military units for traditional warfare. New civilian systems that leverage and reuse military C4I systems to plan, prepare, identify, vector, monitor, and recover ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Optical Patternation of Sprays

    SBC: PRINCETON SCIENTIFIC INSTRUMENTS, INC.            Topic: N/A

    The proposal is to develop a high frame rate imaging system for combustion and other research, by combining a solid state camera capable of capturing images of transient photometric phenomena at framing rates up to 1,000,000 frames per second with the laser sheet illumination technology that has been developed by the Propulsion Directorate of Phillips Laboratory. Both instrumental technologies ar ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  10. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government