You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Modeling Laminar to Turbulent transistion for improved high lift predictions

    SBC: AEROSOFT INC            Topic: N/A

    AeroSoft, Inc. proposes to develop, incorporate and validate transition and anisotropic turbulence models for improving the low-Reynolds number predictions for high-lift airfoil configurations. The turbulence-modeling package will use Menter's two equati

    SBIR Phase I 1997 Department of DefenseNavy
  2. Advanced Cable Connector Concepts

    SBC: Alden Products Co.            Topic: N/A

    Existing materials used for marine cable connectors each have drawbacks in terms of cost or performance. Alden Products Company proposes a program to develop a family of cable connectors and adapters that lower the present cost/performance barrier in two ways; through the use of alternative materials and through new manufacturing methods using the existing materials. The main goals of P ...

    SBIR Phase I 1997 Department of DefenseNavy
  3. Operational Trainer for FFG-7 AAW Combat System

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    The proposed prototype Operational Trainer for the FFG-7 AAW Combat System will provide the US Navy with a means for training the FFG-7 AAW combat team to operate their equipment in condition 1 watch stations. Each watch station will be provided with the ability to train as they fight by allowing continuous on-board AAW training that includes all elements of the combat system with interactions as ...

    SBIR Phase I 1997 Department of DefenseNavy
  4. Fretting Wear Resistant Coatings for Turbine Engine Applications

    SBC: ANALYTICAL SERVICES & MATERIALS, INC.            Topic: N/A

    Attachment areas in the regions of rotating components of gas turbine engines degrade due to fretting wear and fatigue. Plasma sprayed coatings are often used to protect these regions. A thin, dense, Ti(C, N) composite coating based on sol-gel process is proposed. The simple, cost-effective sol-gel process will coat complex shapes and will provide superior performance against fretting wear. Di ...

    SBIR Phase I 1997 Department of DefenseNavy
  5. High Resolution Time-Frequency Representations

    SBC: AMRON CORPORATION            Topic: N/A

    The objective of the proposed Phase I work is to demonstrate the feasibility of using the Choi-Williams distribution to estimate the time ¿ frequency distribution of transients of interest to the IUSS. The specific objectives are to develop a metric for IUSS images and to show that the Choi-Williams distribution of these images may be used for classification. The Choi-Williams distribution is ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. Optical Rotman Beamforming Lens for Multi-Function RF/Microwave/Millimeter Wave Antenna Systems

    SBC: Anro Engineering, Inc.            Topic: N/A

    In this six-month Phase I program, ANRO Engineering, Inc. proposes to investigate the properties of compact, low-cost, two-dimensional fiber optic and integrated optic Rotman lenses for application to wideband, multi-function RF/microwave/millimeter wave antenna (MFA) systems. The photonic Rotman lens will enable the reception and transmission of simultaneous, multiple frequency, independent ...

    SBIR Phase I 1997 Department of DefenseNavy
  7. Engineering Models of Reactive Munitions and Damage Effects

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict structural response and the associated damage to air targets from reactive munitions. The objectives for the proposed Phase I study effort are to develop candidate launch conditioning, reaction initiation and reaction rate methodology, to incorporate existing ballistic, blast and quasi-static pres ...

    SBIR Phase I 1997 Department of DefenseNavy
  8. Laser Beam Delivery in a Fiberoptic with Corrected Phase by a Phase Conjugate Mirror

    SBC: Aspen Systems, Inc.            Topic: N/A

    Aspen System proposes an innovative technology for correcting the phase of a high power laser beam delivered via a multimode fiberoptic. The proposed system has an architecture lending itself to a broad variety of applications that range from ladars to medical catheters. Keeping the commercial applications in perspective, the laser source and other bulky components are positioned at the back-e ...

    SBIR Phase I 1997 Department of DefenseNavy
  9. Automatic Registration of Forward-Looking Imagery

    SBC: ATLANTIC AEROSPACE ELECTRONICS CORP.            Topic: N/A

    Atlantic Aerospace Electronics Corporation proposes to develop an automatic image registration sufficiently accurate to deal with images exhibiting differences in scale and perspective. The algorithm consists of a global step aimed at registration of features on the ground, followed by a local step to accommodate objects with vertical extent. The global component will be based on Harris Informat ...

    SBIR Phase I 1997 Department of DefenseNavy
  10. Integrated Color Coding and Monochrome Multi-Spectral Fusion

    SBC: ATLANTIC AEROSPACE ELECTRONICS CORP.            Topic: N/A

    The proposed effort is aimed at the development and demonstration of the feasibility of a new integrated color coding and a contrast-based monochromatic fusion process. We will investigate two methods for color coding that utilize the monochrome fused image. Each of the color coding methods will provide consistency of color presentation as a function of daytime, background variability and illum ...

    SBIR Phase I 1997 Department of DefenseNavy
US Flag An Official Website of the United States Government