You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Optical Fiber-Based Corrosion System Using Electrochemically Active Coatings

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    The objective of the proposed program is to address the high service costs of the current U.S. Navy fleet of aircraft by developing a distributed optical fiber sensor system that will help reduce the costs associated with corrosion damage and extend the lifetime of existing aircraft. Annual corrosion of Navy metallic structures has been estimated as high as $1 billion. Additional costs aris ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Ionic Self Assembled Monolayer (ISAM) Processes for Electronic Materials and Devices

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    Novel ionic self-assembled monolayer (ISAM) processes for the fabrication of advanced electronic materials and devices will be developed through this program. Revolutionary ISAM methods to create nanostructured multi-layer inorganic/organic thin-films offer major advantages over conventional manufacturing processes, since the process is simple, low-cost and environmentally friendly in that no vola ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Protective Coatings for Optical System Components Fabricated Using Ionic Self Assembled Monolayer (ISAM) Processes

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    F&S and Virginia Tech will cooperatively develop high performance protective ionic self-assembled monolayer (ISAM) organic/inorganic coatings for space-based optical and structural components, and work with Litton to upscale practical coating manufacturing. Revolutionary ISAM methods of creating multi-layer protective nanopartwcle films offer major advantages over con-ventional coating processes, ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Parallel Optical Memory Interconnects

    SBC: LSA            Topic: N/A

    In this proposal, we describe a novel approach for realizing a parallel, nonmechical, read/write interconnection for angle-multiplexed three-dimensional (3-D) optical memories. Our concept represents a significant first step required toward taking this critical memory technology from the laboratory and inserting it into operational systems. The concept utilizes novel optomechanical packaging and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Sensors-Adaptive Beam Expander

    SBC: LSA            Topic: N/A

    We propose to design and fabricate an adaptive beam expander that can be switched between two magnifications. Specifically, the beam expander provides diffraction-limited performance for laser radar beams with diameters of 1 mm and 3 mm. The adaptive beam expander is lightweight, and it has no moving parts. Because the beam expander is an afocal system, it operates on both outgoing and incoming be ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Plasma Synthesis of Aluminum Nitride Nanopowders

    SBC: MATERIALS MODIFICATIONS INC            Topic: N/A

    Aluminum nitride is as an ideal thermal management material since it has a very high thermal conductivity and its electrical resistivity is comparable to that of ceramic insulators. Aluminum nitride has thermal conductivity five times greater than alumina and has mechanical strength twice that of alumina and beryllium oxide. The current methods of synthesizing and consolidating aluminum nitride re ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Application of a Novel Micromachining Process to Millimeter Wave Circuit Fabrication

    SBC: MICROFAB (WASVA MILLIMETER WAVE)            Topic: N/A

    MicroFab Research (MFR, Inc.) proposes to apply the techniques of micromachining to aid in the fabrication of millimeter wave components, thereby reducing manufacturing expenses. Many microwave applications such as radar and communication systems would be improved by shifting to higher frequencies, provided new lower cost manufacturing techniques can be found. A manufacturing technique is presente ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government