Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Process-Based Assurance Product Suite

    SBC: Arca Systems, Inc.            Topic: N/A

    Arca proposes research leading to development of a suite of methodology support products to help meet the need for innovative assurance techniques appropriate for emerging information technologies. The product will consist of a licensable methodology and supporting materials for specifying, building, and evaluating assurance arguments for products and systems based on the capability of security en ...

    SBIR Phase I 1997 Department of Commerce
  2. Algorithms for Health Care Quality Management and Outcomes Assessment

    SBC: BARRON ASSOCIATES, INC.            Topic: N/A

    American health care is in the midst of momentous change. Quality improvement principles are being used increasingly to enhance productivity and efficiency of health care delivery and to help contain costs. In producing patient outcomes and resource utilization measures, it is vital to control appropriately for case mix (i.e., differences in patients due, e.g., to illness severity) in the predicti ...

    SBIR Phase I 1997 Department of Commerce
  3. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  4. Analysis Software for Near-Field Optical Microscopes

    SBC: Field Precision            Topic: N/A

    The near-field scanning optical microscope can supply information on the shape and electrical properties of surfaces with nanometer resolution. The quantitative interpretation of images is difficult because of the difficulty of electromagnetic field solutions in the near-field limit. We propose to supply software to aid in this analysis. The finite-element programs generate two and three-dimension ...

    SBIR Phase I 1997 Department of Commerce
  5. A Spray Nozzle with Electrically Controllable Spray Characteristics

    SBC: Fluid Jet Associates            Topic: N/A

    In the conduction of benchmark combustion experiments, a fuel spray nozzle that produces a steady-well-defined spray is needed. This fuel spray, of known properties, is a boundary condition for the atomization, mixing, and combustion which results throughout the combustor volume. Present spray nozzles use fluid turbulence, which is chaotic, to drive the spray formation. Because the turbulence ampl ...

    SBIR Phase I 1997 Department of Commerce
  6. New Methods for Evaluating Thermal Performance of Protective Clothing for

    SBC: KTECH CORP.            Topic: N/A

    A growing number of fire fighters are suffering third degree burns; this has led to questions about the adequacy of thermal protective performance (TPP) measurements for protective clothing. A new heat flux sensor, whose response approximates that of skin, will be developed to provide better measurements of heat transfer in TPP tests. This sensor will be used with nonlinear parameter estimation an ...

    SBIR Phase I 1997 Department of Commerce
  7. Thermographic Phosphor Based Heat Flux Sensors

    SBC: KTECH CORP.            Topic: N/A

    As fire protection engineering moves towards the implementation of performance- based fire codes, the use of validated fire models is becoming a necessity. Part of the validation process involves demonstrating model capabilities for predicting key fire environment parameters. One of the key parameters for estimating time to ignition and fire growth is the heat transfer rate to compartment surfaces ...

    SBIR Phase I 1997 Department of Commerce
  8. XRD Integral Method Determination of the Triaxial Residual Stress Field

    SBC: Lambda Research            Topic: N/A

    Finish machining of structural ceramics can produce residual stresses, and subsurface defects (SSD) acting as stress concentrators, in the near-surface material. Residual stresses and SSD produced by machining affect the mechanical properties of ceramic components. In this context, it is essential that the residual stresses be properly quantified in ceramics, in order to establish suitable machini ...

    SBIR Phase I 1997 Department of Commerce
  9. Characterization of Consolidation of Non-Spherical Powders

    SBC: Matsys Incorporated            Topic: N/A

    We propose to characterize the early stage of consolidation of non-spherical powders to further the development of process models to enable simulation of powder metallurgy manufacturing for the consumer market, especially the automotive industry. Typically, spherical powders with a narrow size distribution are used for aerospace applications, while low-cost powders with irregular shapes and a wide ...

    SBIR Phase I 1997 Department of Commerce
  10. Holographic Condensing Illuminator

    SBC: North Dancer Labs, Inc.            Topic: N/A

    Abstract not Available

    SBIR Phase I 1997 Department of Commerce
US Flag An Official Website of the United States Government