You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Reactor for Control of Fugitive Emissions of Toxic Gases

    SBC: Coyote Aerospace/high Mesa            Topic: N/A

    A need to control the fugitive emissions of hazardous vapors, volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) has been identified in operations at Army plants and depots. The High Mesa Technologies (HMT)/Coyote Aerospace team proposes to meet this need using proven silent discharge plasma (SDP) techniques, developed by the Electric Power Research Institute and Los Alamos Nat ...

    SBIR Phase I 1997 Department of DefenseArmy
  2. Advanced Armor Vehicle Design

    SBC: Physics Mathematics &            Topic: N/A

    This project applies a combination of Artificial Neural Networks (ANN), Genetic Algorithms (GA), and CAD software to the problem of optimum armor design. Previous work for TACOM has established the efficacy of ANN/GA as applied to the problem of 1-D armor design. This new work will extend the concept to full 3-D vehicle geometries (CAD models). The CAD part of the code will handle the 3D data d ...

    SBIR Phase I 1997 Department of DefenseArmy
  3. Cooling Enhancements for Radiators

    SBC: Technical research Associates, Inc.            Topic: N/A

    This Phase I will test the application of high heat conducting carbon fibers to increase the efficiency of air/liquid heat exchangers. TRA's unique technology to apply molten copper to carbon fibers will allow the reliable construction of copper/graphite heat exchanger structures. Since TRA's technique will allow the selective application to copper interfaces, the manufacturing of a common heat ...

    SBIR Phase I 1997 Department of DefenseArmy
  4. Integration of Performance Models Into Virtual Prototyping Environment

    SBC: TECHNICAL SOLUTIONS, INC.            Topic: N/A

    An opportunity exists for performance models to be integrated into a continuous data flow process receiving data from design tool output and providing results to wargames used for analysis. Design tool outputs an providing results to wargames used for analysis. Design processes specify shape, configuration, materials, function and other required design components to achieve a conceptualized capab ...

    SBIR Phase II 1997 Department of DefenseArmy
  5. Low Temperature Processing of Boron Carbide Cement Composite for Tough, Wear Resistant Structures

    SBC: TPL, INC            Topic: N/A

    Natural materials such as tooth, bone or shell consist of a high volume fraction of ceramic grains coated by thin layers of proteinaceous film. The ceramic grains are grown in situ in a pre-formed organic polymer matrix. The organic portion provides high toughness, while the ceramic component provides stiffness. This unique microstructure allows for mechanical properties superior to man-made ce ...

    SBIR Phase I 1997 Department of DefenseArmy
  6. Reducing Operation and Support Costs with PCMCIA Based Automatic Test Systems

    SBC: WESTEST ENGINEERING CORP            Topic: N/A

    Military electronic systems have become so complex that computer controlled Automatic Test Systems (ATS) must be used for their test and repair. These test systems contain a central computer and a series of test instruments. The computer communicates with and controls the instruments via a high level bus. Because of this, automatic test systems have a semi-rigid architecture which can not easil ...

    SBIR Phase I 1997 Department of DefenseArmy
  7. Non-Eroding Fin Materials

    SBC: Applied Research Associates, Inc.            Topic: N/A

    This project will analyze and select promising materials and designs to be used in the plumes of tactical solid rocket motors for missile steering and control. The emphasis is on high-performance refractory materials and compatibility of material systems. The control fins experience severe thermal and severe particulate erosion environments. Missile controllability requires fins with minimal er ...

    SBIR Phase I 1996 Department of DefenseArmy
  8. Numerical Simulation of Dynamic Stall

    SBC: Ecodynamics Research Associate            Topic: N/A

    The objective of the proposed program is to develop, demonstrate and validate a three-dimensional, time-dependent, compressible Navier-Stokes program for predicting dynamic stall. The foundation of the program is an existing 3-D program that has been developed under prior SBIR funding for retreating-blade dynamic stall on modern high-performance helicopter rotors. The program will be improved in ...

    SBIR Phase I 1996 Department of DefenseArmy
  9. Image Processing Using Temporal Cellular Neural Networks

    SBC: Intelligent Reasoning Systems (IRS)            Topic: N/A

    This proposal addresses the development of a compact, high-speed camera system that integrates a Charge-Coupled Device (CCD) solid-state imager and a Temporal Cellular Neural Network (TCNN) (using three-dimensional TC technology) to provide real-time image processing capability for scientific and engineering applications. The integrated CCD/TCNN camera provides high-speed image collection and proc ...

    SBIR Phase II 1996 Department of DefenseArmy
  10. Modeling the Powder Injection Molding Process for Defect-Free, Net-Shape Metal and Ceramic Components.

    SBC: LONE PEAK ENGINEERING COMPANY            Topic: N/A

    The Army has identified a need for process innovations that would support the production of components for light weight vehicles out of advanced materials. The use of advanced, lightweight structural materials in vehicular applications presents an opportunity to enhance the effectiveness of Army units. Through more effective energy utilization, fuel will be conserved, which will simplify the log ...

    SBIR Phase I 1996 Department of DefenseArmy
US Flag An Official Website of the United States Government