You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ultrafast Polysilylene Scintillators

    SBC: Adherent Technologies, Inc.            Topic: N/A

    40640 November 12, 1996 Adherent Technologies, Inc. Scintillators have been used for over 90 years to detect ionizing radiation, but solid organic scintillator, commonly used in physics experimentation, suffer from errors caused by pulse pileup. To minimize this problem, this project will examine a new class of polymeric materials which also offer the po ...

    SBIR Phase II 1997 Department of Energy
  2. SBIR Phase I: Tertiary Recycling Process for Polymer-Based Automotive Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Science Foundation
  3. SBIR Phase I: Liquid Crystalline Thermoset (LCT) Adhesives for High-Temperature Applications

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Science Foundation
  4. SBIR Phase I: Moisture-Resistant Composite Finishes

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Science Foundation
  5. Novel Adhesives For Space Applications

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 National Aeronautics and Space Administration
  6. Ferroelectric Capacitors for Pulse Power Electronics

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    HIGH-DENSITY ENERGY STORAGE AND FAST DISCHARGE WILL BE CRITICAL IN A VARIETY OF HIGH POWER AEROSPACE APPLICATIONS. CAPACITORS ARE IDEAL FOR THESE PURPOSES, AS WELL AS FOR POWER CONDITIONING AND FILTERING. UNFORTUNATELY, BULK POWDER-BASED DIELECTRICS USED IN CAPACITORS HAVE SEVERE LIMITATIONS, ESPECIALLY THE HIGH NUMBER OF SHORT-INDUCING DEFECTS CAUSED BY POOR CONTROL OF MATERIAL PROPERTIES IN CERA ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  7. DEFECT REDUCTION IN BULK 6H-SIC

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    DUE TO ITS UNIQUE PROPERTIES AND ITS ABILITY TO BE PROCESSED ANALOGOUSLY TO SILICON, SILICON CARBIDE (SIC) WILL BE AN IMPORTANT HIGH TEMPERATURE, HIGH POWER, AND HIGH FREQUENCY ELECTRONIC MATERIAL. THE BARRIER TO THIS DEVELOPING TECHNOLOGY WAS THE AVAILABILITY OF 6H-SIC SUBSTRATES. HOWEVER, THESE SUBSTRATES ARE NOW PRODUCED IN EVER-INCREASING QUANTITIES AND THE NEW BARRIER IS THE QUALITY OF THES ...

    SBIR Phase II 1997 National Science Foundation
  8. SECOND GENERATION LEAD CVD PRECURSORS FOR PBTIO3

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    CHEMICAL VAPOR DEPOSITION (CVD) OF LEAD-BASED FERROELECTRICS SUCH AS LEAD TITANATE, LEAD ZIRCONATE TITANATE (PZT), AND LEAD LANTHANUM ZIRCONATE TITANATE (PLZT), IS THE MOST PROMISING MANUFACTURING METHOD FOR A WIDE VARIETY OF NEXT GENERATION ELECTRONIC DEVICES INCLUDING RADIATION-HARD NON-VOLATILE MEMORIES, ELECTRO-OPTIC SPATIAL LIGHT MODULATORS, PIEZOELECTRIC ACTUATORS, AND PYROELECTRIC INFRARED ...

    SBIR Phase II 1997 National Science Foundation
  9. Non-destructive Depth Dependent Stress Monitor

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Aircraft landing gear, and wheels in particular, are subjected to heavy loads during service. Controlled surface compressive stresses help to improve the fatigue life by reducing the probability of crack initiation and propagation from the wheel surface. Manufacturers such as Allied Signal will induce a surface compressive stress by either shot peening or roll burnishing. Acoustic an ...

    SBIR Phase II 1997 Department of DefenseAir Force
  10. High Brightness LEDs based on the (A1, Ga,In)N Materials System

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    116 High Brightness LEDs based on the (Al, Ga,In)N Materials System--Advanced Technology Materials, Inc., 7 Commerce Drive, Danbury, CT 06810-4131; Dr. Karim Boutros, Principal Investigator Dr. Duncan W. Brown, Business Official DOE Grant No. DE-FG02-97ER82319 Amount: $75,000 Based on a combination of physical, electronic and optical properties, the semiconductor materials system (aluminum, g ...

    SBIR Phase I 1997 Department of Energy
US Flag An Official Website of the United States Government